Service manual

4G6 ENGINE <1993>
- Front Case, Silent Shaft and Oil Pan
11 F-99
3EN022
APPLY
9EN0094
- blD998373-01
6EN058e
i
6EN0587
+D4 OIL PUMP DRIVEN GEAR / OIL PUMP DRIVE GEAR
INSTALLATION
(1) Apply’ engine oil amply to the gears and line up the
alignment marks.
+E4 SEALANT APPLICATION TO OIL PRESSURE GAUGE
UNIT
(1) Coat the threads of switch with sealant and install the
switch using the special tool.
Specified sealant: 3M ATD Part No. 8660 or equivalent
Caution
1. Keep the end of threaded portion clear of sealant.
2. Avoid an overtightening.
#F4 SEALANT APPLICATION TO OIL PRESSURE
SWITCH
(1) Coat the threads of switch with sealant and install the
switch using the special tool.
Specified sealant: 3M ATD Part No.8660 or equivalent
Caution
1. Keep the end of threaded portion clear of sealant.
2. Avoid an over-tightening.
eG4 RIGHT SILENT SHAFT REAR BEARING
INSTALLATION
(1) Apply engine oil to the outer surface of bearing.
(2) Using special tools, install right rear bearing. Make sure that
oil hole of bearing is aligned with oil hole of cylinder block.
vision
I