Specifications

ENGINE <4G9-GDI> – Oil Pan
11A-22
REMOVAL SERVICE POINTS
AA" STEERING GEAR BOX INSTALLATION BOLT
REMOVAL
Remove the steering gear box installation bolts and lower
the steering gear box.
AB" LOWER OIL PAN REMOVAL
Place a piece of wood against the lower oil pan, and tap
the piece of wood with a hammer to remove the lower oil
pan.
Caution
Because the upper oil pan used is made from aluminium,
the oil pan remover (MB998727) should not be used.
AC" FRONT DIFFERENTIAL MOUNT CENTER BOLT/
FRONT DIFFERENTIAL MOUNT REMOVAL
1. Support the front differential by a jack, and remove the
front differential mount center bolts and the front differential
mount.
2. Remove the jack and lower the front differential.
AD" UPPER OIL PAN REMOVAL
After removing all installation bolts, install 2 bolts (M6 85)
in the upper oil pan as shown, noting that one located on
the left side and one on the right side. Turn the bolts to remove
the upper oil pan.
Caution
Because the upper oil pan used is made from aluminium,
the oil pan remover (MB998727) should not be used.
INSTALLATION SERVICE POINT
"AA DRAIN PLUG GASKET INSTALLATION
Install the drain plug gasket in the direction so that it faces
as shown in the illustration.
Lower oil pan
Bolt
Drain plug
gasket
Oil pan side