Specifications

ENGINE <4G9-GDI> – Engine AssemblyENGINE <4G9-GDI> – Engine Assembly
11A-34
REMOVAL SERVICE POINTS
AA" POWER STEERING OIL PUMP REMOVAL
Remove the power steering oil pump from the engine with
the hose attached.
NOTE
Place the removed power steering oil pump where it will not
be a hindrance when removing and installing the engine
assembly, and tie it with a cord.
AB" A/C COMPRESSOR REMOVAL
Disconnect the A/C compressor connector and remove the
compressor from the compressor bracket with the hose still
attached.
NOTE
Place the removed A/C compressor where it will not be a
hindrance when removing and installing the engine assembly,
and tie it with a cord.
AC" ENGINE ASSEMBLY REMOVAL
1. Check that all cables, hoses and harness connectors,
etc. are disconnected from the engine.
2. Lift the chain block slowly to remove the engine assembly
upward from the engine compartment.
INSTALLATION SERVICE POINT
"AA ENGINE ASSEMBLY INSTALLATION
Install the engine assembly, checking that the cables, hoses,
and harness connectors are not clamped.