Specifications

ENGINE <4G9> – Camshaft and Camshaft Oil Seal
11A-9
2. Tighten the beam camshaft cap mounting bolt to the
specified torque in the order of the numbers shown in
the illustration.
Symbol Number
of unit
Dimensions
mm (Nominal
diameter ×
nominal length)
Tightening
torque Nm
 4 8 × 32 19 – 23
 16 6 × 35 10 – 12
 7 8 × 40
19 – 23
 4 8 × 40
D CAMSHAFT OIL SEAL INSTALLATION
1. Apply engine oil to the circumference of the oil seal
lip.
2. Press-fit the oil seal as shown in the illustration.
E ENGINE COVER INSTALLATION
1. Tighten the mounting bolt temporarily in the order of the
numbers shown in the illustration so that the engine cover
can be moved by hand.
2. Tighten the mounting bolt to the specified torque in the
order of the numbers shown in the illustration.
Tightening torque: 3.0 Nm
2
4
3
1
56
7
8
12
14
21
28
11
19
13
20
29
22
15
9
17
24
23
16
10
18
25
26
27
30
31
Front of the engine
MD998713
4
2
1
3