Specifications

ENGINE <4G9> – Cylinder Head Gasket

11A-12

REMOVAL SERVICE POINTS

A RADIATOR UPPER HOSE REMOVAL

Put mating marks on the radiator upper hose and the

hose clamp for removal.

B POWER STEERING OIL PUMP REMOVAL

Remove the power steering oil pump with the hose

attached from the bracket.

NOTE

Tie the removed power steering oil pump and the A/C

compressor with strings to set aside so that they will not

hinder the removal and installation of the engine

assembly.

C CYLINDER HEAD BOLT REMOVAL

1. Set the dowel pin of the camshaft at the position shown

in the illustration.

2. Use the special tool to loosen the bolt in the order of

the numbers shown in the illustration in two to three stages

for removal.

Dowel pin

Intake side

Exhaust side

Approx. 30

Approx. 16

MB991653

Front of the engine