Specifications

ENGINE <4G9-GDI> – Special Tools
11A-4
SPECIAL TOOLS
Tool Number Name Use
MB991502 MUT-II sub
assembly
D Measuring the drive belt tension
D Checking the ignition timing
D Checking the idle speed
D Erasing diagnosis code
MB991668 Belt tension meter
set
Measuring the drive belt tension
(used together with the MUT-II)
MB990767 End yoke holder D Holding the camshaft sprocket
D Holding the crankshaft sprocket
MD998719 or
MD998754
Crankshaft pulley
holder pin
D Holding the camshaft sprocket
D Holding the crankshaft sprocket
MD998713 Camshaft oil seal
installer
Press-in of the camshaft oil seal
MD998781 Flywheel stopper Securing the flywheel or drive plate
MD998776 Crankshaft rear oil
seal installer
Press-in of the crankshaft rear oil seal
MB990938 Handle Press-in of the crankshaft rear oil seal
MD998717 Crankshaft front oil
seal installer
Press–in of crankshaft front oil seal