Operating instructions

ManualsBrandsMitsubishi ManualsHome Theater System738 Series

3D Adapter

MODEL

3DA-1

OWNER’S GUIDE

Features

Converts 3D video originating in several popular formats to checker-•

board format for display on your 3D or 3D-ready Mitsubishi television.

Processes side-by-side, top-and-bottom, and frame-packing 3D •

(e.g., Blu-ray 3D) formats.

Passes 2D images unaltered for normal display.•

Compatible with these Mitsubishi television models:

3D-Ready

Televisions

(2007 through

2010)

833 series (2007) L65-A90 (2008) L75-A91 (2010)

C8 series (2008) 737 series (2009) 638 series (2010)

735 series (2008) 837 series (2009) C10 series (2010)

736 series (2008) C9 series (2009)

835 series (2008) L75-A81 (2010)

3D Televisions

(starting in 2010)

738 series (2010) 838 series (2010)

Summary of content (8 pages)

PAGE 1
3D Adapter MODEL 3DA-1 OWNER’S GUIDE Features • Converts 3D video originating in several popular formats to checkerboard format for display on your 3D or 3D-ready Mitsubishi television. • • Processes side-by-side, top-and-bottom, and frame-packing 3D (e.g., Blu-ray 3D) formats. Passes 2D images unaltered for normal display.
PAGE 2
Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8) Only use attachments/accessories specified by the manufacturer. 9) Refer all servicing to qualified service personnel.
PAGE 3
Battery Installation The remote control requires one CR2025 lithium battery. 1 To remove the battery, press on the retaining clip. 2 Emitter 1. Remove the cover. 2. Insert the battery, positive side up. Be sure the retaining clip holds the battery securely. 3. Reinstall the cover. Lithium Battery Safety This product uses a CR2025 Li/MnO2 lithium coin battery. WARNING: Lithium coin cell batteries pose a serious risk of injury if ingested. Keep cells out of reach of children.
PAGE 4
Connecting the Adapter Connecting a Single 3D Video Source • • • Power off all devices prior to connecting the Adapter. If the device was in use prior to adding the Adapter, use the same TV input if possible. On an 833 series TV, the input must be named Game. Step 1. HDMI OUT 3D GLASSES EMITTER OUT AC power adapter (provided) 5V DC 2A 3D GLASSES EMITTER IN HDMI IN 5V DC 2A Step 2.
PAGE 5
Using the Adapter 1. If using an emitter, position it where there 2. will be a clear path to the 3D glasses. Note: An emitter is not needed for 3D glasses using DLP Link. Power on the TV and the 3D video device. Note: The 3D video device must be powered on before the 3D Adapter can power on. 3. If the 3D Adapter does not power on automatically when you power 4. on the 3D video device, press the POWER button. If the New Input Found screen displays, assign a name to the input.
PAGE 6
3D Safety Requirements • 3D Glasses are NOT designed as sunglasses or safety glasses and do not provide protection. 3D glasses should be worn only when viewing 3D material. • Do not wear the wireless glasses in any situations that require unimpaired visual perception. • Children under the age of 5 should not view 3D programming. Under normal conditions, 3D viewing is safe for your movies or games. Some people may experience discomfort, however.
PAGE 7
Mitsubishi Model 3DA-1 3D Adapter Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants as follows to the original purchaser of this 3D adapter from an authorized MITSUBISHI Audio/ Video Dealer, should the adapter prove defective by reasons arising from improper workmanship and/or material: a. Length of Warranty.
PAGE 8
the product covered under this warranty is found, service related to unsatisfactory audio or visual reception or signal unless caused by a defect in the product that is covered under this limited warranty, all costs, expenses or any other damages arising from product installation, or set-ups, any adjustments of user controls (including contrast, brightness, color, tint, fine tuning, sharpness to the connected TV), other adjustment necessary to prepare the unit for display or use, connection with any externa