User guide

Accessport Features & Functionality Page 14
Use 'Set Data Log List' in the 'Monitor' sub-menu to set which monitors are logged.
NOTE: The Accessport is only capable of datalogging while the ignition is turned to
the “ON” position. The Accessport will display an error message if it cannot
communicate with the vehicle.
NOTE: Up to 10 log files can be stored on the Accessport. Use AP Manager to delete
unneeded logs. If datalogging is started when there are already 10 log files on the
Accessport, the log file with the lowest numerical value will be automatically
overwritten.
NOTE: The 10 log files can be a combined length of 2+ hours long.
Set Rev Warning
Use this function to set the desired RPM value for Shift Light. The Shift Light function is
available while viewing Live Data. While the actual engine RPM exceeds the desired RPM
limit, the Accessport screen will flash, indicating an over-rev condition.
Set Live Data List
This list allows the user to enable and disable items for viewing in Live Data. Only monitors
with a checkbox will be in the list of available monitors to view while in Live Data. Highlight a
monitor and press the OK button to activate/deactivate it for logging.
Use 'Live Data' in the 'Monitor' sub-menu to view monitor data.
Set Data Log List
This list allows the user to enable and disable items for logging. Only monitors with a
checkbox will be recorded while using the Data Log feature. Highlight a monitor and press
the OK button to activate/deactivate it for logging.
Use 'Data Log' in the 'Monitor' sub-menu to start and stop logging.
NOTE: Datalogging performance is reduced as the number of items selected to
Revision 1.097 Jun 25, 2013