User guide

Accessport Features & Functionality Page 16
Performance
The Accessport can calculate several performance measurements.
NOTE: The Accessport is only capable of calculating performance test results while
the ignition is turned to the “ON” position. The Accessport will display an error
message if it cannot communicate with the vehicle.
0-60 MPH
To record the 0-60 MPH performance, select this menu option and follow instructions. A time
slip showing the performance results will be displayed at the end of the performance test.
¼ Mile
To record the ¼ Mile performance, select this menu option and follow instructions. A time slip
showing the performance results will be displayed at the end of the performance test.
Dynamometer
Use this feature to estimate your vehicle's wheel horsepower and torque. This can be used to
see the actual performance gains of part upgrades.
NOTE: You will be prompted to enter a vehicle weight, test gear, and RPM range for
the test. This data will be stored for future use. If you want to revert to the default data,
select 'Reset Dyno' in the 'Performance' sub-menu.
Reset Dyno
Reset to default for dynamometer test parameters.
Revision 1.097 Jun 25, 2013