Installation manual

ManualsBrandsMitsubishi ManualsAir ConditionerAG-150A-A

Contents

1. Safety Precautions..................................................1

2. Parts List .................................................................2

3. External Dimensions ...............................................2

4. Product Features.....................................................3

1. Specification......................................................3

2. Parts names and functions ...............................3

5. System Diagram......................................................5

6. Installation...............................................................6

1. Field-supplied Parts ..........................................6

2. Installation.........................................................6

7. Wiring....................................................................12

8. Initial Setting..........................................................13

9. Test Run................................................................14

10. System Configuration Example.............................14

1. To control a K control model ...........................14

11. External input/output usage ..................................14

1. External signal input function ..........................14

2. External signal output function........................15

3. LAN connection function .................................16

12. Optional accessories.............................................17

Air-conditioner Network System

Centralized Controller

Model: AG-150A Installation Manual

Before installing the controller, please read this Installation Manual carefully to ensure

proper operation. Retain this manual for future reference.

Summary of content (20 pages)

PAGE 1
Air-conditioner Network System Centralized Controller Model: AG-150A Installation Manual Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Safety Precautions ..................................................1 Parts List .................................................................2 External Dimensions ...............................................2 Product Features.....................................................3 1. Specification......................................................3 2.
PAGE 2
This manual describes how to install the centralized controller and wiring. Before installing the controller, read the 1 Safety Precautions section carefully to ensure proper installation. 1 Safety Precautions Safety symbols used in this manual The following symbols are used in this manual to indicate the type and severity of potential consequences that may result when given instructions are not followed exactly as stated. WARNING Indicates a risk of death or serious injury.
PAGE 3
2 Parts List * The Installation Manual and the parts listed below are included with the unit. No. Description Qty. 1 AG-150A Centralized controller 1 2 A type Installation plate 1 3 B type Installation plate 1 4 Wood screw 4.
PAGE 4
B type installation plate 152 (6) ø4 ø6 (1/4) (3/16) ø4 ø6 (3/16) (1/4) 4 Product Features AG-150A is a centralized controller that features advanced functions such as the Web function. Up to 50 indoor units can be monitored and operated from an AG-150A unit. 1.
PAGE 5
Left view USB storage device Connects to a USB storage device to copy data from the AG-150A Back View CN3 Unused CN4 Unused LAN Connects to the LAN CN2 CN5 Connects to the power cable Connects to PAC-YG10HA (supplied) when the mounting external input/output adapter attachment A-type (PAC-YG85KTB; sold separately) is used to attach the controller. V+V-FG Connects to PAC-SC51KUA power supply that supplies 24 VDC power.
PAGE 6
5 System Diagram POWER (24VDC) LAN Centralized controller Model:AG-150A Indoor unit Power supply unit Model: PAC-SC51KUA Local remote controller M-NET transmission line K transmission line MA remote controller line M-NET R2 M-NET outdoor unit The numbers in the indicate the address No. BC controller Group 3 TB7 TB3 M-NET outdoor unit TB7 LOSSNAY ME Group 1 TB3 Group 2 004 003 MA MA Mr. Slim Outdoor unit Mr.
PAGE 7
6 Installation CAUTION * Install and wire the unit with the power to the PAC-SC51KUA power supply unit turned off. * Do not put the signal wire and power wire in the same conduit. 1. Field-supplied Parts 1 Electric box: PAC-YG83UTB (sold separately) (When following installation method described in section “2. Installation” item 1.) 2 Mounting attachment: PAC-YG81TB (sold separately) (Required only when following installation method described in section “2. Installation” item 3.
PAGE 8
2-1. Wall-Embedded installation with an electric box 1 Ensure there is enough space to install the controller as shown below. Wall space and 60 mm (2-3/8 in) of clearance behind the wall are required to mount an electric box.
PAGE 9
M-NET transmission cable Type of the cable; Sheathed vinyl cords or cable which comply with the following specifications or equivalent. • CPEVS φ1.2mm to φ1.6mm • CVVS 1.25mm² to 2mm² (AWG16 to 14) * CPEVS; PE insulated PVC jacketed shielded communication cable * CVVS; PVC insulated PVC jacketed shielded control cable PE: Polyethylene PVC: Polyvinyl chloride DC power cable The DC power cable should comply with both local standards as well as the power requirement of the unit. Recommended type: 0.
PAGE 10
2-2. Embedding the centralized controller in the wall. 1 Ensure there is enough space to install the controller as shown in the figure at right. Unit: mm (in) 120 (4-3/4) 150 (5-15/16) 185 (7-5/16) 300 (11-13/16) 30 (1-3/16) 30 (1-3/16) 2 Cut out an opening in the wall as shown in the shaded area in the figure at right. (W × H: 278 mm (11 in) × 152 mm (6 in)) Follow the dimensions in the figure exacting. If the opening is too large, it will be hard to properly install the unit.
PAGE 11
2-3. Wall-mounting the centralized controller. 1 Ensure there is enough space to install the controller as shown in the figure at right. Unit: mm (in) 185 (7-5/16) 300 (11-13/16) 120 (4-3/4) 150 (5-15/16) 30 (1-3/16) 30 (1-3/16) 2 Punch out the appropriate knockout hole, depending on how the wiring is routed. AG-150A Knockout hole 3 Push the M-NET transmission cable, DC power cable through the knockout hole.
PAGE 12
2-4. Installing the centralized controller and a power supply unit (PAC-SC51KUA; sold separately) inside the mounting attachment on the wall 1 Ensure there is enough space to install the controller as shown in the figure at right. Unit: mm (in) 300 (11-13/16) 220 (8-11/16) 400 (15-3/4) 150 (5-15/16) 30 (1-3/16) 30 (1-3/16) 2 Install the mounting attachment PAC-YG85KTB (sold separately) on the wall with the four M4 screws (supplied).
PAGE 13
9 Install the centralized controller inside the mounting attachment with the four M4 screws (supplied). 0 Replace the surface cover. a Attach the power supply unit cover with the two screws. 7 Wiring Choose from the two unit installation methods below. 1 When installing the AG-150A by following the installation method described in 2-1 through 2-3 in 6 Installation , connect the cables to the terminal block as shown in the figure below.
PAGE 14
2 Installing the AG-150A by following the installation method described in 2-4 in 6 Installation , DC power line and M-NET transmission cable are connected using a connector as shown figure below. Connectable to the connector using the cable that is supplied with AG-150A.
PAGE 15
9 Test Run • Before performing a test run, verify that the group setting has been performed and the startup sequence for the interlocked operation setting has been completed. • It may take approximately 10 minutes from power on until the local remote controller becomes operable. By pressing the operation/ Stop button on the touch panel on AG-150A the remote controller will become operable right away. Test run procedure 1 Turn the AG-150A and all air conditioning units on.
PAGE 16
(3) External input specifications CN5 Lead wire Emergency stop/normal level signal ON/OFF, level signal ON/OFF, prohibit/enable pulse signal No.5 Orange Emergency stop/normal input ON/OFF input ON input No.6 Yellow Not used Not used OFF input No.7 Blue Not used Not used Local remote controller operation prohibit input No.8 Gray Not used Not used Local remote controller operation enable input No.
PAGE 17
(3) Recommended circuit CN5 9 4 3 2 1 This unit Brown Black Green Max.10m (32 ft) Diode (*2) (*2) (*2) Z1 Z1 Use Z1 and Z2 relays that meet the following specifications. Operation coil Rated voltage: 12VDC, 24VDC Power Consumption: 0.9W or less (*1) Prepare a power supply separately according to the relay being used (12VDC or 24VDC). (*2) Always include a diode on both ends of the relay coil.
PAGE 18
12 Optional accessories Parts Model Usage Power supply unit PAC-SC51KUA Supplies power to the controller and M-NET transmission cable Electric box PAC-YG83UTB Use for wall-embed installations Mounting attachment A type PAC-YG85KTB Note Use when both the controller and a power supply for the transmission cable (PAC-SC51KUA) are included.
PAGE 19
PAGE 20
This product is designed and intended for use in residential, commercial and light-industrial applications. The product is based on the following EU regulations: • Low Voltage Directive 2006/95/EC • Electromagnetic Compatibility Directive 2004/108/EC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide resonable protection against harmful interference in a residential installation.