MITSUBISHI ELECTRIC MULTIPLE SPLIT TYPE AIR CONDITIONERS Series CITY MULTI AIR CONDITIONING SYSTEMS The Air Conditioning & Refrigeration Systems Works acquired ISO 9001 certification under Series 9000 of the International Standard Organization (ISO) based on a review of Quality management for the production of refrigeration and air conditioning equipment. ISO Authorization System The ISO 9000 series is a plant authorization system relating to quality management as stipulated by the ISO.
Air conditioning is an ideal way of controlling the temperature, movement and cleanliness of air inside any building, large or small. With today's buildings being so well insulated and increasingly full of electronic equipment, the need for effective climate control is greater than ever. Not only does it cool in the summer months, but air conditioning can also heat, doing away with the need for separate heating systems altogether.
V RF system Our answer to VRF Mitsubishi Electric sets the boundaries of VRF technology with the City Multi range, which is available using R410A refrigerant with zero ODP (Ozone Depletion Potential). The range has been specifically designed for today’s building requirements and addresses key market issues such as energy efficiency, adaptability and reliability.
I nverter Driven Compressor Technology - now up to 50HP Low Starting Currents Using inverter driven technology saves energy for several reasons: The compressor varies its speed to match the indoor cooling or heating demand and therefore only consumes the energy that is required. When an inverter driven system is operating at partial load, the energy efficiency of the system is significantly higher than that of a standard fixed speed, non inverter system.
I ntelligent Power Module (IPM) Technology The YHM-A range from Mitsubishi Electric provides precise control of energy input, through utilization of its Intelligent Power Module (IPM) technology. By employing this technology it is possible to closely match the building requirements, achieving more accurate control of the occupied space. By using incremental 1Hz steps of capacity control, the amount of power input required is significantly reduced, resulting in greatly improved COP’s.
E fficient R410A refrigerant History of refrigerant R22, an HCFC-based refrigerant, has been a popular choice for most chillers. R22 has been targeted by the Montreal Protocol to be phased out in new equipment. Additionally, governments in many countries are enforcing a ban of HCFC-based refrigerants for new installations. Because of these restrictions, R410A refrigerants are desirable. R410A is a blend of HFCs, which do not deplete the ozone.
U nique technology Unique to Mitsubishi Electric, our heat recovery technology uses just two pipes, as opposed to the market conventional three. Designed for effective simultaneous heating and cooling our R2 and WR2 systems offer substantial savings on installation and annual running costs. Why Heat Recovery? Flexibility and efficiency are key factors when selecting a heat recovery system.
T he world s first and the only 2-pipe system How does the R2 /WR2 Heat Recovery System operate on 2 Pipe’s? The secret of City Multi heat recovery systems lies in the BC Controller “2-pipe” system provides Better Efficiency and Performance The BC Controller houses a liquid/gas separator, allowing the outdoor unit to deliver a mixture (2 phase) of hot gas for heating and liquid for cooling, all through the same pipe. Three pipe systems allocate a pipe to each of these phases.
E nergy Saving Technology What is Water-Cooled? >A unique offering from Mitsubishi Electric It is possible now to combine the features of VRF with a water circuit using City Multi WR2/WY. In this case the heat is rejected to a water source rather than to the outside air. The advantages of water cooled systems are that the water can be delivered at optimised temperatures and volumes, which allows even greater flexibility and increased COP.
The importance of control The need for control is paramount in order to optimise the performance of any air conditioning system and minimize its running costs. Mitsubishi Electric offers a wide range of control options designed to meet such needs. Operating an air conditioning system without the right control can prove costly. It's therefore important to ensure that every system is correctly specified to the degree of control it requires.
Integrated Communications Control with Mitsubishi's Unique Transmission Network (M-NET) System Controller MITSUBISHI ELECTRIC's Air-conditioner Network System (MELANS) leads air conditioner management a PC browser and Network era. MELANS Use of our MELANS products enhances EFFICIENCY and QUALITY of air-conditioning, contributing to ENERGY SAVING and reduction in running cost.
Individual Remote Controller Wired MA remote controller PAR-21MAA • Dot matrix liquid crystal screen • Set temperature in 1˚C/˚F increment • Weekly timer Up to 8 ON/OFF/temperature setting per day in 1 minute increment. Setting kept in nonvolatile memory. No need to worry about re-setting at power failure.
Individual Remote Controller Wired ME remote controller PAR-F27MEA Wireless remote controller PAR-FL32MA / PAR-FA32MA • This remote control requires non-polar wiring to only one indoor unit. • Group operation over multiple outdoor units is possible. Grouping can be changed without re-wiring, which makes dividing rooms for tenants easier. • Timer operation *Daily timer operation of one ON/OFF setting everyday *Auto-off timer : 0:30, 1:00, 1:30, 2:00...4:00 *The setting is kept in nonvolatile memory.
Centralized Remote Controller One system controller can control up to fifty indoor units from one location. The PAC-SF44SRA also has hardwired connection available (On/Off input, fire alarm input, run output, fault output). System remote controller PAC-SF44SRA Mitsubishi Electric controllers are complimented by a weekly programmable timer, being able to control up to fifty indoor units. The PAC-YT34STA also has hardwired connection available (On/Off input, fire alarm input, run output, fault output).
Centralized Remote Controller Just press a switch to start. All of the units can be On/Off by pressing the main switch, and each unit in the group can be On/Off with individual switch. The PAC-YT40ANRA also has hardwired connection available (On/Off input, fire alarm input, run output, fault output). ON/OFF remote controller PAC-YT40ANRA Group remote controller PAC-SC30GRA DESCRIPTION FUNCTION UNITS Up to 8 groups can be operated (maximum of 16 units).
Centralized Remote Controller With a new colored touch panel, and continuation of all the current G-50A functions, AG-150A visualizes its functions from basic control to advanced operations and bringing an ultimate controller to reality. Centralized controller AG-150A New Design System structure M-NET Switching Hub M-NET adapter LAN (100BASE-TX) M-NET A Control New Functions Backlight Color liquid crystal Controllable units/groups Backlight makes it easy to see and control units.
Centralized controller GB-50A The Web Server Function enables Remote Operation or Scheduling Via a Web Browser on a Personal Computer! Up to 50 indoor units can be controlled! Centralized Remote Controller Web Browser Enables monitoring and operation of indoor units using a PC with Microsoft® Internet Explorer (Ver.5 or upper) (Web browser function is an optional and needs license registration.
Centralized Remote Controller DIDO Controller PAC-YG66DCA Integrated centralized control software TG-2000A No more PLCs are needed! Our new DIDO controller makes it possible to control general-purpose equipment without PLC, which is cost saving. Up to 6 general-purpose equipment can be connected to the DIDO controller. Up to 150 units can be controlled by AG-150A.* *Expansion controller is required. Example of Basic System Configuration *24 VDC power needs to be provided on site.
LONWORKS (LMAP02) BACnet interface(PAC-YG31CDA) CITY MULTI can easily combine into a Building Management System (BMS) via the LONWORKS and M-NET adapter LMAP02. LONWORKS is an opened transmission protocol widely used at BMS, and related equipment control. CITY MULTI is therefore compatible with large-scaled BMS management via LONWORKS . MITSUBISHI ELECTRIC's CITYMULTI can be easily connected to the building management system through BACnet .
BACnet® and M-NET adapter (BAC-HD150) CITY MULTI can easily combine into a Building Management System (BMS) via the BACnet® and M-NET adapter BAC-HD150. BACnet is an opened transmission protocol widely used at BMS, and related equipment control. CITY MULTI is therefore compatible with largescaled BMS management via BACnet. One BAC-HD150 manages up to 50 indoor units without software installation to PC. Example of Basic System Configuration. Central monitor BMS BACnet/IP NO software installation to PC.
Wide selection of indoor units Ceiling cassette (4-way air flow) Page41 - Page42 Fresh Air Intake Page55 PLFY-P VBM-E PLFY-P VCM-E Model P20 P25 P32 P40 P50 Capacity 2.2kW 2.8kW 3.6kW 4.5kW 5.6kW - Page56 PEFY-P VMH-E-F Model P63 P80 P100 P125 Model P80 P140 P200 P250 Capacity 7.1kW 9.0kW 11.2kW 14.0kW Capacity 9.0kW 16.0kW 22.4kW 28.
INDOOR UNIT Ceiling cassette type 4-way airflow PLFY-P VBM-E PLFY-P VCM-E Specifications Power source ❇1 ❇1 ❇1 Heating capacity ❇1 Cooling Power Heating consumption Cooling Current Heating External finish Unit (Munsell No.) Panel Dimension Unit H✕W✕D Panel Unit Net weight Panel Heat exchanger Type ✕ Quantity ❇2 Airflow rate Fan (Lo-Mid1-Mid2-Hi) Cooling capacity PLFY-P VBM PLFY-P VCM The new 4-way cassette VBM offers 72 different airflow patterns, making it ideal for applications with ceilings up to 4.
INDOOR UNIT Ceiling cassette type 2-way airflow PLFY-P VLMD-E Specifications PLFY-P20VLMD-E PLFY-P25VLMD-E PLFY-P32VLMD-E 1-phase 220-240V 50Hz / 1-phase 220-230V 60Hz 3.6 2.8 12,300 9,600 4.0 3.2 13,600 10,900 0.072 / 0.075 0.072 / 0.075 0.065 / 0.069 0.065 / 0.069 0.36 / 0.37 0.36 / 0.37 0.30 / 0.32 0.30 / 0.32 Galvanized steel plate Pure white (6.4Y 8.9/0.
INDOOR UNIT Ceiling cassette type 1-way airflow PMFY-P VBM-E Specifications PMFY-P20VBM-E Power source ❇1 kW ❇1 BTU/h kW ❇1 Heating capacity ❇1 BTU/h Power Cooling kW consumption Heating kW Cooling A Current Heating A External finish (Munsell No.) Dimension Unit mm(in.) H✕W✕D Panel mm(in.) Unit kg(lbs.) Net weight Panel kg(lbs.) Heat exchanger Type 3 ❇2 m /min Airflow rate Fan L/s (Lo-Mid2-Mid1-Hi) cfm External staticpressure Pa Type Motor Output kW Air filter Refrigerant Gas(Flare) mm(in.
INDOOR UNIT Ceiling concealed type Specifications PEFY-P20VMR-E-L Power source PEFY-P VMR-E-L/R Static Pressure 5Pa Width 640mm 25-6/32in.
INDOOR UNIT Ceiling concealed type Specifications PEFY-P15VMS1(L)-E PEFY-P VMS1(L)-E Static Pressure Height 5~50Pa 200mm Power source Width Low Noise 7-28/32in. kW ❇1 ❇1 BTU/h kW ❇1 Heating capacity ❇1 BTU/h Power ❇3 Cooling kW consumption Heating kW A Cooling Current ❇3 Heating A External finish Dimension mm H✕W✕D In. Net weight ❇3 kg(lbs.) Heat exchanger Type ✕ Quantity 3 m /min Airflow rate Fan L /s (Lo-Mid-Hi) cfm Pa External static press type Motor kW output Air filter mm(in.
INDOOR UNIT Ceiling Concealed Type New Specifications PEFY-P40VMA(L)-E PEFY-P25VMA(L)-E PEFY-P32VMA(L)-E PEFY-P50VMA(L)-E 1-phase 220-230-240V 50 / 60Hz 4.5 2.8 3.6 5.6 2.2 15,400 9,600 12,300 19,100 7,500 5.0 3.2 6.3 4.0 2.5 17,100 10,900 21,500 13,600 8,500 0.09 [0.07] 0.06 [0.04] 0.11 [0.09] 0.07 [0.05] 0.06 [0.04] 0.07 0.04 0.09 0.05 0.04 0.64 [0.53] 0.53 [0.42] 0.74 [0.63] 0.55 [0.44] 0.53 [0.42] 0.53 0.42 0.63 0.44 0.
INDOOR UNIT Ceiling concealed type PEFY-P VMH-E Specifications PEFY-P40VMH-E Power source Cooling capacity Heating capacity High Static Pressure Power consumption Increased design flexibility from sufficient external static pressure allows authentic duct air- conditioning with an elegant interior layout. Current ❇1 ❇1 ❇1 ❇1 Cooling Heating Cooling Heating kW BTU/h kW BTU/h kW kW A A External finish Dimension H ✕ W ✕ D Net weight Heat exchanger Type ✕ Quantity mm in. kg(lbs.
INDOOR UNIT Fresh Air Intake Type Specifications Power source PEFY-P VMH-E-F ❇1 ❇1 ❇1 Heating capacity ❇1 Cooling Power consumption Heating Cooling Current Heating External finish Dimension H✕W✕D Net weight Heat exchanger Type ✕ Quautity Cooling capacity Fresh Air Intake Fresh Air can be taken in with temperature control. Ideal for Offices, Stores and Restaurants. kW BTU/h kW BTU/h kW kW A A mm(in.) kg(lbs.
INDOOR UNIT Ceiling suspended type Specifications New PCFY-P40VKM-E Power source PCFY-P VKM-E ❇1 ❇1 ❇1 ❇1 kW BTU/h kW Heating capacity BTU/h kW Cooling Power kW consumption Heating A Cooling Current A Heating External finish(Munsell No.) mm Dimension H ✕ W ✕ D in. kg(lbs.) Net weight Heat exchanger Type ✕ Quantity 3 ❇2 m /min Airflow rate L/s Fan (Lo-Mid2-Mid1-Hi) cfm External static pressure Pa Type Motor Output kW Air filter Gas mm(in.) (Flare) Refrigerant Liquid pipe diameter mm(in.
INDOOR UNIT Wall mounted type PKFY-P VBM-E PKFY-P VHM-E PKFY-P VKM-E New New Specifications PKFY-P VBM PKFY-P VHM PKFY-P15VBM-E ❇1 ❇1 ❇1 ❇1 kW BTU/h kW Heating capacity BTU/h kW Cooling ❇4 Power kW consumption Heating A Cooling ❇4 Current A Heating External finish(Munsell No.) Dimension H ✕ W ✕ D mm(in.) kg(lbs.) Net weight Heat exchanger Type ✕ Quantity 3 ❇2 m /min Airflow rate L/s Fan (Lo-Mid2-Mid1-Hi) cfm External static pressure Pa Type Motor Output kW Air filter Gas mm(in.
INDOOR UNIT Floor standing exposed Specifications PFFY-P20VKM-E Power source PFFY-P VKM-E ❇1 ❇1 ❇1 Heating capacity ❇1 Cooling Power Heating consumption Cooling Current Heating External finish Dimension H✕W✕D Net weight Heat exchanger Type ✕ Quantity Airflow rate (Lo-Mid-Hi-SHi) Fan Eaternal static pressure Type Motor Output Air filter Gas(Flare) Refrigerant pipe diameter Liquid(Flare) Field drain pipe diameter Sound pressure level (Lo-Mid-Hi-SHi) ❇2 Cooling capacity PFFY-P VKM-E For living rooms, bed
INDOOR UNIT Floor standing exposed Specifications PFFY-P63VLEM-E PFFY-P50VLEM-E PFFY-P40VLEM-E PFFY-P25VLEM-E PFFY-P32VLEM-E 1-phase 220-240V 50Hz / 1-phase 208-230V 60Hz 5.6 7.1 4.5 2.8 3.6 2.2 24,200 19,100 15,400 9,600 12,300 7,500 8.0 5.0 6.3 3.2 4.0 2.5 27,300 21,500 17,100 10,900 13,600 8,500 0.085 / 0.09 0.1 / 0.11 0.065 / 0.075 0.06 / 0.07 0.04 / 0.06 0.1 / 0.11 0.065 / 0.075 0.085 / 0.09 0.06 / 0.07 0.04 / 0.06 0.46 / 0.47 0.40 / 0.41 0.32 / 0.33 0.29 / 0.30 0.19 / 0.25 0.40 / 0.41 0.46 / 0.47 0.
INDOOR UNIT Floor mounted concealed type Specifications PFFY-P25VLRM-E PFFY-P32VLRM-E PFFY-P40VLRM-E PFFY-P50VLRM-E PFFY-P63VLRM-E 1-phase 220-240V 50Hz / 1-phase 208-230V 60Hz 2.8 3.6 4.5 5.6 7.1 2.2 9,600 12,300 15,400 19,100 24,200 7,500 3.2 4.0 5.0 6.3 8.0 2.5 10,900 13,600 17,100 21,500 27,300 8,500 0.06 / 0.07 0.065 / 0.075 0.085 / 0.09 0.1 / 0.11 0.04 / 0.06 0.06 / 0.07 0.065 / 0.075 0.085 / 0.09 0.1 / 0.11 0.04 / 0.06 0.29 / 0.30 0.32 / 0.33 0.40 / 0.41 0.46 / 0.47 0.19 / 0.25 0.29 / 0.30 0.32 / 0.
BC CONTROLLER CMB-P-V-G CMB-P-V-GA CMB-P-V-HA CMB-P-V-GB CMB-P-V-HB Specifications Model name Number of branch Power source CMB-P-V-G CMB-P-V-GA CMB-P-V-HA kW Power input A Current External finish Indoor unit capacity connectable to 1 branch * Connectable Outdoor unit Height Width Depth BC CONTROLLER To outdoor unit In many ways, the BC Controller is the technological heart of the CITY MULTI R2/WR2.
The Ventilation System for Enhanced Air Quality - Lossnay LOSSNAY Technology Combine with Lossnay Ventilation System Enhanced Air Quality. Unified Control System Allows Greater Design Freedom. • Two paths ventilation LOSSNAY simultaneously intakes Fresh Air and exhausts Dirty Air. • Total energy recover LOSSNAY returns BOTH sensible heat and latent heat. A. Two paths ventilation 4˚C (39.
RX5 SERIES Why LOSSNAY is necessary. Extra Low Mode Additional energy conservation by using a four-level air volume system that allows more precise control. • Without ventilation... Lack of Ventilation makes people sick by dirty indoor air including CO2, Dust, Bacteria. • If just opening windows...
Model line up New function: "By-pass" Ventilation External Control Setting In addition to the automatic damper open/close function, open/close control via external devices is now possible, delivering a “By-pass” ventilation system that is suitable to the installed environment. "By-pass" operation Control devices (example) .Temperature sensor .Humidity sensor Exhaust air .
Model line up Specification LGH-50RX5-E LGH-15RX5-E LGH-15RX5-E Model Frequency / Power source LOSSNAY ventilation Frequency / Power source By-pass ventilation Ventilation mode Fan speed Extra High High Low Extra Low Extra High High Low Extra Low Ventilation mode Fan speed Current (A) 0.44-0.46 0.37-0.38 0.25-0.25 0.14-0.15 0.45-0.46 0.37-0.38 0.25-0.26 0.14-0.
Control The New Remote Controller PZ-60DR-E enable simple control setting LGH-100RX5-E Interlocked with Air conditioners LOSSNAY independent LGH-100RX5-E Model Frequency / Power source Interlocked with City Multi Interlocked with Mr.Slim 50Hz / Single phase 220-240V LOSSNAY ventilation Ventilation mode Fan speed By-pass ventilation Extra High High Low Extra Low Extra High High Low Extra Low Current (A) 2.3-2.4 2.1-2.1 1.7-1.7 0.9-0.9 2.3-2.4 2.1-2.1 1.7-1.7 0.9-0.
OA Processing Units RDH3 SERIES OUTDOOR AIR PROCESSING UNIT GUF type Ideal Indoor-Air Quality — For Your Comfort and Health General The OA (outdoor-air) Processing Unit creates an optimum indoor-air environment at an unparalleled rate of cost efficiency providing substantial energy savings. Forced air ventilating and humidifying functions unique to this system keep indoor-air fresh and free of contaminants preventing “sick building syndrome” and the spread of airborne viruses such as the flu.
O utdoor unit Heat Pump Series (S) Heat Pump Series (Y) Heat Pump Series - High COP (Y) Heat Pump Series - ZUBADAN (Y) Water cooled Heat Pump Series (WY) Heat Recovery Series (R2) Heat Recovery Series - High COP (R2) Water Cooled Heat Recovery Series (WR2) Page81 Page82
S (Heat Pump) series Y (Heat Pump) series Cooling or Heating S series PUMY-P VHMB(-BS) PUMY-P YHMB(-BS) Y series R2 (Heat Recovery) series Simultaneous Cooling and Heating PUHY-P YHM-A(-BS) PUHY-P YSHM-A(-BS) PUHY-EP YHM-A(-BS) PUHY-EP YSHM-A(1)(-BS) R2 series PURY-P YHM-A(-BS) PURY-P YSHM-A(-BS) PURY-EP YHM-A(-BS) PURY-EP YSHM-A(1)(-BS) The two-pipe zoned system designed for Heat Pump Operation The world’s first two-pipe system that Simultaneously Cools and Heats The CITY MULTI S series (for smal
Y series & R2 series Y series & R2 series Common Features in Y (Heat Pump) series & R2 (Heat recovery) series Compact Design Industry leading weight saving As of September, 2006 (based on internal survey) 10HP outdoor unit The manageability of the outdoor unit has been improved due to a drastic reduction in it's weight, leading to easy transportation, installation, and reduction in withstand load.
ZUBADAN ZUBADAN Cooling or Heating PUHY-HP YHM-A(-BS) PUHY-HP YSHM-A(-BS) ZUBADAN series Bringing a year round comfort solutions to extreme climates CITY MULTI ZUBADAN series combines the ultimate in application flexibility and powerful cooling and heating capabilities to deliver precise comfort even in the coldest days of the year down to -25˚C.
ZUBADAN ZUBADAN High Static Pressure Setting Maximum Stable Operation High Static Pressure Setting up to 60Pa is available. With our new ZUBADAN model, high static pressure setting up to 60Pa is available by setting the dip switch (0Pa at factory setting) making it ideal and flexible for any type of application.
Water Coold Series Water Cooled Series System Pipe Lengths Cooling or Heating WY series PQHY-P YHM-A PQHY-P YSHM-A [8-24HP (WY series)] [8-24HP (WR2 series)] Refrigerant Piping Lengths Total length Maximum allowable length PQRY-P YHM-A PQRY-P YSHM-A WR2 series [WY(Heat Pump) series] Farthest indoor from first branch Maximum meters [Feet] 300-500 [984-1640] 165 (190equivalent) [541 (623)] 40 [131] Vertical differentials between units Indoor/heat source (heat source higher) Indoor/heat source (hea
Wide selection of outdoor units Wide selection of outdoor units Heat Pump Series - High COP Heat Pump Series S Series (4HP-6HP) Page97,98 4HP Model 5HP Y Series - High COP (8HP-12HP) Page107 PUHY-EP YHM-A(-BS) PUHY-P YSHM-A(-BS) PUMY-P VHMB(-BS) PUMY-P YHMB(-BS) Model Name Y Series (28HP-36HP) Page102,103 Y Series - High COP (28HP) PUHY-EP YSHM-A(-BS) 6HP PUMY-P100VHMB(-BS) PUMY-P125VHMB(-BS) PUMY-P140VHMB(-BS) Model PUMY-P100YHMB(-BS) PUMY-P125YHMB(-BS) PUMY-P140YHMB(-BS) Model Name Y
Wide selection of outdoor units Wide selection of outdoor units Heat Recovery Series - High COP Heat Recovery Series R2 Series (8HP-12HP) Page117 PURY-P YSHM-A(-BS) PURY-P YHM-A(-BS) 8HP Model Model Name R2 Series (26HP-28HP) Page121 10HP 12HP PURY-P200YHM-A(-BS) PURY-P250YHM-A(-BS) PURY-P300YHM-A(-BS) R2 Series (14HP-16HP) Page118 PURY-P YHM-A(-BS) R2 Series - High COP (8HP-12HP) Page123 R2 Series - High COP (18HP-20HP) Page125 PURY-EP YSHM-A(-BS) PURY-EP YHM-A(-BS) Model 26HP 28HP
OUTDOOR UNIT S Series PUMY-P VHMB(-BS) OUTDOOR UNIT S Series PUMY-P YHMB(-BS) Specifications Specifications PUMY-P100VHMB(-BS) Power source ❇1 kW Cooling capacity ❇1 BTU/h (Nominal) Power input kW Current input A COP (kW/kW) Indoor W.B. Temp. range of Outdoor D.B. cooling ❇2 kW Heating capacity ❇2 BTU/h (Nominal) Power input kW Current input A COP (kW/kW) Indoor temp. D.B. Temp. range Outdoor temp. W.B.
OUTDOOR UNIT Y Series PUHY-P YHM-A(-BS) OUTDOOR UNIT Y Series PUHY-P YHM-A(-BS) Specifications Specifications PUHY-P200YHM-A(-BS) PUHY-P250YHM-A(-BS) PUHY-P300YHM-A(-BS) 3-phase 4-wire 380-400-415V 50/60Hz Power source ❇1 kW Cooling capacity 22.4 28.0 33.5 ❇1 BTU/h (Nominal) 76,400 95,500 114,300 kW Power input 5.72 7.73 9.07 A Current input 9.6-9.1-8.8 13.0-12.3-11.9 15.3-14.5-14.0 COP (kW/kW) 3.91 3.62 3.69 W.B. 15~24˚C(59~75˚F) Temp. ❇3 Indoor range of D.B.
OUTDOOR UNIT Y Series PUHY-P YSHM-A(-BS) OUTDOOR UNIT Y Series PUHY-P YSHM-A(-BS) Specifications Specifications Set name Power source ❇1 kW Cooling capacity ❇1 BTU/h (Nominal) kW Power input A Current input COP (kW / kW) W.B. Temp. ❇4 Indoor range of D.B. Outdoor cooling ❇2 kW Heating capacity ❇2 BTU/h (Nominal ) kW Power input A Current input COP (kW/kW) Temp. ❇4 Indoor temp. D.B. range Outdoor temp. W.B.
OUTDOOR UNIT Y Series PUHY-P YSHM-A(-BS) OUTDOOR UNIT Y Series PUHY-P YSHM-A (-BS) Specifications Set name Power source Cooling capacity (Nominal) Specifications PUHY-P850YSHM-A(-BS) ❇1 ❇1 96.0 327,600 30.18 50.9-48.4-46.6 3.18 kW BTU/h Power input kW Current input A COP (kW/kW) Temp. ❇3 Indoor W.B. range of Outdoor D.B. cooling ❇2 Heating capacity kW ❇2 BTU/h (Nominal) Power input kW Current input A COP (kW/kW) Temp. ❇3 Indoor temp. D.B. range Outdoor temp. W.B.
OUTDOOR UNIT Y Series PUHY-P YSHM-A(-BS) OUTDOOR UNIT Y Series PUHY-P YSHM-A(-BS) Specifications Specifications Set name Power source ❇1 Cooling capacity kW ❇1 BTU/h (Nominal) Power input kW Current input A COP (kW/kW) Temp. ❇4 Indoor W.B. range of Outdoor D.B. cooling ❇2 Heating capacity kW ❇2 BTU/h (Nominal ) Power input kW Current input A COP (kW/kW) Temp. ❇4 Indoor temp. D.B. range Outdoor temp. W.B.
OUTDOOR UNIT Y Series - High COP PUHY-EP YHM-A(-BS) OUTDOOR UNIT Y Series - High COP PUHY-EP YSHM-A(-BS) Specifications Specifications PUHY-EP200YHM-A(-BS) PUHY-EP250YHM-A(-BS) PUHY-EP300YHM-A(-BS) Power source 3-phase 4-wire 380-400-415V 50/60Hz ❇1 kW 22.4 33.5 Cooling capacity 28.0 ❇1 BTU/h 76,400 114,300 (Nominal) 95,500 kW 5.18 8.25 6.82 Power input A 8.7-8.3-8.0 13.9-13.2-12.7 11.5-10.9-10.5 Current input 4.32 4.06 4.10 COP (kW/kW) W.B. Temp. ❇3 Indoor 15~24˚C (59~75˚F) range of D.B.
OUTDOOR UNIT Y Series - High COP PUHY-EP YSHM-A (-BS) Specifications Set name PUHY-EP550YSHM-A1(-BS) PUHY-EP600YSHM-A(-BS) PUHY-EP650YSHM-A(-BS) Power source 3-phase 4-wire 380-400-415V 50/60Hz ❇1 kW Cooling capacity 69.0 73.0 63.0 ❇1 BTU/h (Nominal) 235,400 249,100 215,000 Power input kW 16.99 18.34 15.44 Current input A 28.6-27.2-26.2 30.9-29.4-28.3 26.0-24.7-23.8 COP (kW/kW) 4.06 3.98 4.08 W.B. 15~24˚C (59~75˚F) Temp. ❇4 Indoor range of Outdoor D.B. - 5~43˚C (23~109˚F) cooling ❇2 kW Heating capacity 76.
OUTDOOR UNIT Y Series - High COP PUHY-EP YSHM-A(-BS) OUTDOOR UNIT Y Series - High COP PUHY-EP YSHM-A(-BS) Specifications Specifications Set name PUHY-EP750YSHM-A1(-BS) PUHY-EP800YSHM-A(-BS) Power source 3-phase 4-wire 380-400-415V 50/60Hz ❇1 kW Cooling capacity 85.0 90.0 ❇1 BTU/h (Nominal) 290,000 307,100 Power input kW 20.43 22.00 Current input A 34.4-32.7-31.5 37.1-35.2-34.0 COP (kW/kW) 4.16 4.09 W.B. 15~24˚C (59~75˚F) Temp. ❇4 Indoor range of Outdoor D.B.
OUTDOOR UNIT ZUBADAN (Heat Pump) Series(Y) PUHY-HP Y(S)HM-A(-BS) HEAT SOURCE UNIT WY (Heat Pump) Series PQHY-P YHM-A Specifications Set name Power source ❇1 Cooling capacity ❇1 (Nominal) Power input Current input COP Indoor Temp. range of Outdoor cooling ❇2 Heating capacity ❇2 (Nominal) Power input Current input COP Indoor Specifications PUHY-HP200YHM-A(-BS) kW BTU/h kW A kW/kW W.B. 22.4 76,400 6.40 10.8-10.2-9.8 3.50 PUHY-HP250YHM-A(-BS) PUHY-HP400YSHM-A(-BS) 3-phase 4-wire 380-400-415V 50/60Hz 28.
HEAT SOURCE UNIT WY (Heat Pump) Series PQHY-P YSHM-A HEAT SOURCE UNIT WY (Heat Pump) Series PQHY-P YSHM-A Specifications Specifications Set name Capacity ❇1 ❇2 kW BTU/h Power source Power input kW Current A COP kW/kW Liquid pipe mm (in.) Refrigerant piping diameter Gas pipe mm (in.
OUTDOOR UNIT R2 Series PURY-P YHM-A(-BS) Specifications PURY-P200YHM-A(-BS) PURY-P250YHM-A(-BS) PURY-P300YHM-A(-BS) 3-phase 4-wire 380-400-415V 50/60Hz Power source ❇1 22.4 28.0 kW Cooling capacity 33.5 ❇1 BTU/h 76,400 95,500 (Nominal) 114,300 5.77 7.73 Power input kW 9.25 9.7-9.2-8.9 13.0-12.3-11.9 Current input A 15.6-14.8-14.2 3.88 3.62 COP (kW/kW) 3.62 W.B. 15 ~ 24˚C (59 ~ 75˚F) Temp. ❇3 Indoor range of Outdoor D.B. - 5 ~ 43˚C (23 ~ 109˚F) cooling ❇2 25.0 31.5 kW Heating capacity 37.
OUTDOOR UNIT R2 Series PURY-P YSHM-A(-BS) OUTDOOR UNIT R2 Series PURY-P YSHM-A(-BS) Specifications Specifications Set name PURY-P450YSHM-A(-BS) PURY-P500YSHM-A(-BS) Power source 3-phase 4-wire 380-400-415V 50/60Hz ❇1 kW 50.0 56.0 Cooling capacity ❇1 BTU/h 170,600 191,100 (Nominal) Power input kW 14.14 16.75 Current input A 23.8-22.6-21.8 28.2-26.8-25.8 COP (kW/kW) 3.53 3.34 15 ~ 24˚C (59 ~ 75˚F) W.B. Temp. ❇3 Indoor range of - 5 ~ 43˚C (23 ~ 109˚F) Outdoor D.B. cooling ❇2 kW 56.0 63.
OUTDOOR UNIT R2 Series PURY-P YSHM-A(-BS) OUTDOOR UNIT R2 Series PURY-P YSHM-A(-BS) Specifications Specifications Set name PURY-P650YSHM-A(-BS) PURY-P700YSHM-A(-BS) Power source 3-phase 4-wire 380-400-415V 50/60Hz ❇1 kW 73.0 80.0 Cooling capacity ❇1 BTU/h 249,100 273,000 (Nominal) kW Power input 22.80 24.72 A Current input 38.4-36.5-35.2 41.7-39.6-38.2 3.20 COP (kW/kW) 3.23 15 ~ 24˚C (59 ~ 75˚F) W.B. Temp. ❇3 Indoor range of - 5 ~ 43˚C (23 ~ 109˚F) D.B. Outdoor cooling ❇2 kW 81.5 88.
OUTDOOR UNIT R2 Series - High COP PURY-EP YHM-A(-BS) OUTDOOR UNIT R2 Series - High COP PURY-EP YSHM-A(-BS) Specifications Specifications PURY-EP200YHM-A(-BS) Power source ❇1 kW Cooling capacity ❇1 BTU/h (Nominal) kW Power input A Current input COP (kW/kW) W.B. Temp. ❇3 Indoor range of D.B. Outdoor cooling ❇2 kW Heating capacity ❇2 BTU/h (Nominal) kW Power input A Current input COP (kW/kW) Temp. ❇3 Indoor temp. D.B. range Outdoor temp. W.B.
OUTDOOR UNIT R2 Series - High COP PURY-EP YSHM-A(-BS) OUTDOOR UNIT R2 Series - High COP PURY-EP YSHM-A(-BS) Specifications Set name Power source Cooling capacity (Nominal) Specifications PURY-EP450YSHM-A1(-BS) PURY-EP500YSHM-A(-BS) 3-phase 4-wire 380-400-415V 50/60Hz ❇1 ❇1 kW BTU/h Power input kW Current input A COP (kW/kW) Temp. ❇3 Indoor W.B. range of Outdoor D.B. cooling ❇2 Heating capacity kW ❇2 BTU/h (Nominal) Power input kW Current input A COP (kW/kW) Temp. ❇3 Indoor temp. D.B.
HEAT SOURCE UNIT WR2 (Heat Recovery) Series PQRY-P YHM-A HEAT SOURCE UNIT WR2 (Heat Recovery) Series PQRY-P YSHM-A Specifications Specifications PQRY-P200YHM-A Cooling Heating 22.4 25.0 76,400 85,300 PQRY-P300YHM-A PQRY-P250YHM-A Cooling Heating Cooling Heating 28.0 31.5 33.5 37.5 ❇1 kW Capacity 95,500 107,500 114,300 128,000 ❇2 BTU/h Power source 3-phase 4-wire 380-400-415V 50/60Hz Power input 3.96 4.12 5.51 5.80 7.44 8.15 kW Current 6.6/6.3/6.1 6.9/6.6/6.3 9.3/8.8/8.5 9.7/9.3/8.9 12.5/11.9/11.5 13.
HEAT SOURCE UNIT WR2 (Heat Recovery) Series PQRY-P YSHM-A Specifications PQRY-P550YSHM-A Set name Capacity ❇1 ❇2 kW BTU/h Power source Power input kW Current A COP kW/kW High press. pipe mm (in.) Refrigerant piping diameter Low press. pipe mm (in.
OPTIONAL PARTS FOR INDOOR UNITS >>4-way cassette type (PLFY-VBM/VCM) Description Decoration panel Automatic Filter Elevation Panel Multi-functional casement High-efficiency filter element Wireless signal receiver Space panel “i-see” sensor Duct flange for fresh air intake Shutter plate Applicable capacity Model SLP-2AA PLP-6BA PLP-6BAJ PAC-SH53TM-E PAC-SH59KF-E PAR-SA9FA-E PAC-SH48AS-E PAC-SA1ME-E PAC-SH65OF-E PAC-SH51SP-E >>2-way cassette type (PLFY-VLMD) Description Decoration panel OA duct flange V
OPTIONAL PARTS FOR OUTDOOR UNITS >>For PUMY-P100 , P125 , P140 VHM Description Branch Pipe (2 Branch) Header Header Drain Socket Centralized Drain Pan Port Connector (ø9.52 → ø12.7 ) Port Connector (ø15.88 → ø19.
MITSUBISHI ELECTRIC MULTIPLE SPLIT TYPE AIR CONDITIONERS Series CITY MULTI AIR CONDITIONING SYSTEMS The Air Conditioning & Refrigeration Systems Works acquired ISO 9001 certification under Series 9000 of the International Standard Organization (ISO) based on a review of Quality management for the production of refrigeration and air conditioning equipment. ISO Authorization System The ISO 9000 series is a plant authorization system relating to quality management as stipulated by the ISO.
