City Multi Energy Efficient VRF Systems
The City Multi range Solutions for more demanding applications Efficient & The City Multi range is Mitsubishi Electric’s answer to large scale VRF (Variable Refrigerant Flow) applications. The efficiency of City Multi is second to none and offers a substantial increase in energy efficiency, with corresponding EER/COP ratings.
flexible The Strength of City Multi The R410A YHM-A series offers some of the highest EER/COP ratings in the market.
The Basics What is VRF? VRF stands for Variable Refrigerant Flow. A VRF air conditioning system modulates the flow of refrigerant depending upon the capacity requirements of the building. A VRF system comprises of a condensing unit sited externally and a series of multiple indoor units to provide cooling and/or heating to the occupied space.
Why R410A? Why Heat Recovery? R410A is a more efficient refrigerant as it has a higher specific heat capacity when compared to R407c or R22. This higher energy carrying capacity allows for smaller pipe sizes, longer pipe runs and reduces the volume of refrigerant within a system. Flexibility and efficiency are key factors when selecting a heat recovery system.
The technology to make City Multi the natural choice Energy efficiency has always been the driver for City Multi technological development. Technology that always delivers the quality and reliability needed for commercial air conditioning environments. Mitsubishi Electric spend more than 5% of their turnover on research and development, with our engineers always looking at ways in which we can improve and lead in air conditioning efficiency.
Heat Interchange Circuit To further enhance the class leading efficiency of City Multi, the unique Heat Interchange Circuit provides extra sub cooling. This system allows optimum refrigerant distribution to multiple indoor units, by allowing more effective use of refrigerant flowing through the electronic expansion valves. Because of the added efficiency, volumes of refrigerant in systems are continuing to reduce.
Ground Source Heat Pumps A very efficient source of energy for water source heat pump systems is the Earth itself. Ground source heat pumps use the Earth's natural solar collection and heat storage capabilities as an infinite heat source/heat sink. At between 1.7m and 3m below the ground, the temperature changes from 17ºC in the summer to 10ºC in the winter. Deeper down however, the temperature of the ground is a constant 10ºC all year round.
Highly eff icient & extremely flexible New Acoustic Kits for PUHY and PURY Series units A range of Acoustic Kits designed for noise reduction. An industry first, the kits offer a 6dBA noise level reduction from standard.
Features and High off coil / High sensible cooling Poor design or application of air conditioning systems can sometimes lead to cold draughts and uneven room temperatures. Low off coil temperatures cause dehumidifying of the air which can create dry eyes and sore throats. Mitsubishi Electric now provides a High Sensible Cooling Function specifically designed to deal with this.
Benefits Fine Control of the Inverter Provides Better Efficiency and Performance Air cooled inverters use the ambient temperature to cool the inverter. For water cooled VRF (which are installed inside the building) refrigerant cooling is used to maintain accurate control of the Inverter. Refrigerant volume checking function This function runs the system, measuring various temperatures and pressures throughout the system, comparing these to the values stored in the units memory from the previous service.
Effective use of space The new models have a smaller foot print requirement than previous models. The width and depth have been reduced by 7% and 13% respectively, with the height being reduced by 130mm. (PUHY-P250YHM-A compared to previous YGM-A versions). YGM-A mm 8-12hp systems (Y / R2 Series) 1.43m2 14-18hp systems (Y Series) 14-16hp systems (R2 Series) 1.
Blue Fin treatment The anti-corrosion Blue Fin treatment of the heat exchanger is especially effective in urban environments where the traffic pollutions can damage the aluminium fins reducing the capacity and life expectancy of the unit. All City Multi R410A outdoor units have been treated with Blue Fin R410A pipe sizing As R410A has a higher specific heat capacity than R22, the pipework is smaller.
City Multi exceeds current demands for Efficiency The need for energy efficiency is paramount and is determined by legislation and regulation. Businesses saw their energy bills rise by up to 15% with the introduction of the Climate Change Levy in April 2001. A year later, the newly revised Par t L (Par t J in Scotland) of the building regulations placed new standards on design of buildings and plant deployed for heating, cooling and ventilating.
Enhanced Capital Allowance Scheme (ECA) The key features of the scheme: I Under the scheme, all businesses liable for UK corporation tax, are able to claim an enhanced capital allowance on any qualifying expenditure (regardless of size and location of business or whether in the industrial or commercial sector) I Businesses can offset the full cost of specific technologies (such as City Multi) against taxable profits of the period of the investment I In order to qualify for this scheme, technology has to m
A wide choice of models The new YHM-A air sourced outdoor models are modular in design and as such differing combinations of them can be connected together to create the required outdoor unit size needed for a particular application. Both the Y Series and R2 ranges come in standard (-P) and high COP (-EP) versions. In addition, the standard versions allow for space-saving by virtue of the combination of units having a smaller foot print than the high COP versions.
Y Series Heat Pump - High COP Version Y Series - High COP (8 - 12hp) PUHY-EP YHM-A 8hp 12hp PUHY-EP200YHM-A PUHY-EP300YHM-A Y Series - High COP (28 - 30hp) PUHY-EP YSHM-A Y Series - High COP (16 - 20hp) PUHY-EP YSHM-A 18hp 16hp PUHY-EP400YSHM-A PUHY-EP450YSHM-A Y Series - High COP (22 - 26hp) PUHY-EP YSHM-A 20hp 22hp PUHY-EP500YSHM-A PUHY-EP550YSHM-A Y Series - High COP (32 - 34hp) PUHY-EP YSHM-A 26hp 24hp PUHY-EP600YSHM-A PUHY-EP650YSHM-A Y Series - High COP (36hp) PUHY-EP YSHM-A 28hp
City Multi Product Range Overview Outdoor Units 14kW Cooling Capacity Y Series (4/5/6hp) WY / WR2 WY / WR2 PUMY-P100-140V/YHMA PQ(H/R)Y-P200/250YGM-A PQ(H/R)Y-P400/500YSGM-A Indoor Units Model / Size PLFY-P-VBM-E PLFY-P-VCM-E PLFY-P-VLMD-E PMFY-P-VBM-E PEFY-P-VMS1-E PEFY-P-VMM-E PEFY-P-VMH-E PCFY-P-VGM-E PKFY-P-VBM/VGM/VFM-E PFFY-P-VLRM-E PFFY-P-VLRMM-E PFFY-P-VLEM-E PFFY-P-VKM-E GUF-RD3 PQFY-P Page 134 15 (1.7kW) 20 (2.2kW) 25 (2.8kW) 32 (3.6kW) 40 (4.
140kW Cooling Capacity Y / R2 Series Standard Y / R2 Series High COP Y / R2 Series Standard Y / R2 Series High COP PUH/RY-P250/300YHM-A PUH/RY-EP200YHM-A PUH/RY-P350-450YHM-A*1 PUH/RY-EP300YHM-A 50 (5.6kW) 63 (7.1kW) 80 (9.0kW) 100 (11.2kW) 125 (14.0kW) 140 (16.0kW) 250 (28.
The energy efficient City Multi VRF range Unique 2-pipe technology provides simultaneous heating and cooling, alongside excellent energy efficiency and corresponding EER/COP ratings. Up to 50 indoor units can be connected to a single outdoor unit, offering the sophistication, control and energy efficiency demanded today.
Contents 138 Y Series (4-6hp) Heat Pump, Outdoor Unit 140 Y Series Standard (10-18hp) Heat Pump, Outdoor Unit 142 Y Series Standard (20-36hp) Heat Pump, Outdoor Unit 144 Y Series Standard (38-50hp) Heat Pump, Outdoor Unit 146 Y Series High COP (8-26hp) Heat Pump, Outdoor Unit 148 Y Series High COP (28-36hp) Heat Pump, Outdoor Unit 150 WY Series (8-20hp) Water Cooled Heat Pump, Outdoor Unit 152 R2 Series Standard (10-16hp) Heat Recovery, Outdoor Unit 154 R2 Series Standard (20-32hp) Heat Rec
Y Series (4-6hp) Heat Pump Outdoor Unit The latest in Mitsubishi Electric R410A Y Series technology. The new City Multi models allow up to 8 indoor units to be connected to a single outdoor unit, using the standard branch/header pipework system proven in the larger models. Utilising the latest Mitsubishi Electric inver ter technology, the system is fully controllable with all City Multi controllers or linked to third party BEMS.
PUMY-P100-140VHMA/YHMA Upper View > Front View > Y Series (4-6hp) Side View > City Multi Range 2008 Dimensions Page 139
Y Series Standard (10-18hp) Heat Pump Outdoor Unit Improved for even higher efficiency The City Multi Y series makes use of a two pipe refrigerant circuit throughout, with the choice of either Branch Pipe or Header Pipe feeds to indoor units, with manual changeover from cooling to heating to ensure that a constant indoor climate is maintained.
Side View Upper View > Front View PUHY-P350, 400, 450YHM-A Side View > Upper View Front View > > > > Y Series Standard (10-18hp) PUHY-P250, 300YHM-A City Multi Range 2008 Dimensions Page 141
Y Series Standard (20-36hp) Heat Pump Outdoor Unit Improved for even higher efficiency The City Multi Y series makes use of a two pipe refrigerant circuit throughout, with the choice of either Branch Pipe or Header Pipe feeds to indoor units, with manual changeover from cooling to heating to ensure that a constant indoor climate is maintained.
PUHY-P500, 550YSHM-A Side View > Front View > PUHY-P600, 650YSHM-A Side View > Front View > City Multi Range 2008 Dimensions PUHY-P700, 750, 800, 850, 900YSHM-A > Front View > Y Series Standard (20-36hp) Side View Page 143
Y Series Standard (38-50hp) Heat Pump Outdoor Unit Improved for even higher efficiency The City Multi Y series makes use of a two pipe refrigerant circuit throughout, with the choice of either Branch Pipe or Header Pipe feeds to indoor units, with manual changeover from cooling to heating to ensure that a constant indoor climate is maintained.
PUHY-P950, 1000YSHM-A Side View > Front View > PUHY-P1050YSHM-A Side View > Front View > City Multi Range 2008 Dimensions PUHY-P1100, 1150, 1200, 1250YSHM-A > Front View > Y Series Standard (38-50hp) Side View Page 145
Y Series High COP (8-26hp) Heat Pump Outdoor Unit Improved for even higher efficiency The City Multi Y series makes use of a two pipe refrigerant circuit throughout, with the choice of either Branch Pipe or Header Pipe feeds to indoor units, with manual changeover from cooling to heating to ensure that a constant indoor climate is maintained.
PUHY-EP200, 300YHM-A PUHY-EP200YHM-A schematic is the same as PUHY-P250, 300YHM-A on page 141 PUHY-EP300YHM-A schematic is the same as PUHY-P350, 400, 450YHM-A on page 141 PUHY-EP400, 450YSHM-A Side View > Front View > City Multi Range 2008 Dimensions PUHY-EP500, 550YSHM-A Side View > Front View > Side View > Front View Y Series High COP (8-26hp) PUHY-EP600, 650YSHM-A > Page 147
Y Series High COP (28-36hp) Heat Pump Outdoor Unit Improved for even higher efficiency The City Multi Y series makes use of a two pipe refrigerant circuit throughout, with the choice of either Branch Pipe or Header Pipe feeds to indoor units, with manual changeover from cooling to heating to ensure that a constant indoor climate is maintained.
PUHY-EP700, 750YSHM-A Side View > Front View > PUHY-EP800, 850YSHM-A Side View > Front View City Multi Range 2008 Dimensions > Side View > Front View Y Series High COP (28-36hp) PUHY-EP900YSHM-A > Page 149
WY Series (8-20hp) Heat Pump, Water Cooled Condensing Unit The WY Series has all the benefits of the Y Series using water cooled condensing units. It is also able to produce heat recovery via the water circuit between heat source units, making for a very economical system.
PQHY-P200, 250YGM-A Upper View Left Side View > > Front View > City Multi Range 2008 Dimensions PQHY-P400, 500YSGM-A > Front View > > WY Series (8-20hp) Left Side View Upper View Page 151
R2 Series Standard (10-16hp) Simultaneous Heating and Cooling with Heat Recovery Outdoor Unit Improved for even higher efficiency Throughout the year, many buildings require cooling in some areas and heating in others even in adjacent rooms. The outstanding City Multi R2 system meets this requirement by distributing surplus heat from cooling operations (and vice versa) to rooms where it is needed. This efficiency can result in energy savings of up to 30% over conventional systems.
Side View Upper View > Front View PURY-P350, 400YHM-A Side View > Upper View Front View > > > > R2 Series Standard (10-16hp) PURY-P250, 300YHM-A City Multi Range 2008 Dimensions Page 153
R2 Series Standard (20-32hp) Simultaneous Heating and Cooling with Heat Recovery Outdoor Unit Improved for even higher efficiency Throughout the year, many buildings require cooling in some areas and heating in others - even in adjacent rooms. The outstanding City Multi R2 system meets this requirement by distributing surplus heat from cooling operations (and vice versa) to rooms where it is needed. This efficiency can result in energy savings of up to 30% over conventional systems.
PURY-P500, 550, 600YSHM-A Side View > Front View > Front View > Front View > PURY-P650, 700YSHM-A Side View > City Multi Range 2008 Dimensions Side View > R2 Series Standard (20-32hp) PURY-P750, 800YSHM-A Page 155
R2 Series High COP (8-24hp) Simultaneous Heating and Cooling with Heat Recovery Outdoor Unit Improved for even higher efficiency Throughout the year, many buildings require cooling in some areas and heating in others - even in adjacent rooms. The outstanding City Multi R2 system meets this requirement by distributing surplus heat from cooling operations (and vice versa) to rooms where it is needed. This efficiency can result in energy savings of up to 30% over conventional systems.
PURY-EP200, 300YHM-A PURY-EP200YHM-A schematic is the same as PURY-P250, 300YHM-A on page 153 PURY-EP300YHM-A schematic is the same as PURY-P350, 400YHM-A on page 153 PURY-EP400, 450YSHM-A Side View > Front View > Front View > Front View > City Multi Range 2008 Dimensions PURY-EP500, 550YSHM-A Side View > Side View > R2 Series High COP (8-24hp) PURY-EP600YSHM-A Page 157
R2 Series Piping Restrictions R2 SERIES PIPING RESTRICTIONS TABLE 1: TOTAL PIPE LENGTH OUTDOOR MODEL MAX LENGTH P250, P300 P350, P400, EP200, EP300 P500, P550, EP400, EP450, EP500, EP550 P600, P650, EP600 P700, P750, P800 550m*1 600m*1 750m*1 800m*1 950m*1 *1 Please refer to Graph 1 GRAPH 1: TOTAL PIPING LENGTH RESTRICTIONS 1000 Total Extended Pipe Length (m) 900 800 700 PURY-P700,750,800 YSHM-A 600 PURY-P600,650,800 YSHM-A, PURY-EP600YSHM-A 500 PURY-P500,550 YSHM-A, PURY-EP400,450,500,550 YSHM-
City Multi Range 2008 R2 SERIES PIPING RESTRICTIONS PIPING LENGTH (>1 BC CONTROLLER FOR 1 OUTDOOR UNIT) ITEM PIPE SECTION A+B+C+D+E+a+b+c+d+e+f A+C+E+f A B+d or C+D+e or C+E+f H H1 h1 h2 h3 Total Piping Length Furthest Piping Length Length Between OU and BC Length Between Furthest IU and BC Height Between OU and IU (OU above IU) Height Between OU and IU (OU below IU) Height Between IU and BC Height Between IU and IU Height Between BC (Main or Sub) and BC (Sub) MAX LENGTH (See Table 1) 165m 110m*1 60m*2
WR2 Series (8-20hp) Water Cooled Condensing Unit Simultaneous Heating and Cooling with Double Heat Recovery The WR2 system has double heat recovery potential, making this system very economical. Not only does it produce heat recovery from indoor units on the same refrigerant circuit, it also produces heat recovery via the water circuit between heat source units.
PQRY-P200, 250YGM-A Upper View Left Side View > > Front View > City Multi Range 2008 Dimensions PQRY-P400, 500YSGM-A > Front View > > WR2 Series (8-20hp) Left Side View Upper View Page 161
PFD-P-VM-E (10/20hp) Heat Pump Close Control System Mitsubishi Electric’s new Close Control System is specifically designed for computer rooms, laboratories etc, where a need for high sensible cooling and close control of temperature and humidity is required. Because of the need for close control 24 hours a day, 365 days a year, a newly developed inverter driven compressor has been incorporated into the outdoor unit, maximising the energy efficiency of the PFD series.
PFD-P250VM-E Upper View > Side View Front View > > City Multi Range 2008 Dimensions PFD-P500VM-E Upper View > Side View > PFD-P-VM-E (10/20hp) Front View > Page 163
PLFY-P-VBM-E 2, 3 and 4-Way Blow Ceiling Cassette Indoor Unit Power cassettes offer 72 different airflow patterns, with the ability to handle a multitude of ceiling applications up to 4.2 meters in height. The easy to install, slim unit is ideal for maintaining constant temperatures, thanks to adjustable vanes that allow users to precisely direct air where it’s needed.
PLFY-P32, 40, 50, 63, 80, 100, 125VBM-E Upper View > Lower View > > MODELS A B PLFY-P32-80VBM-E 241 258 PLFY-P100-125VBM-E 281 298 PLFY-P-VBM-E Side View City Multi Range 2008 Dimensions Page 165
PLFY-P-VCM-E 600x600 4-Way Blow Ceiling Cassette Indoor Unit The compact size of this unit is ideal for 600x600mm ceilings and with a depth of 208mm, this lightweight unit makes installation a breeze. This unit also comes complete with a long life filter that will last for approximately 2,500 hours.
PLFY-P20, 25, 32, 40VCM-E Lower View > PLFY-P-VCM-E Side View > City Multi Range 2008 Dimensions Page 167
PLFY-P-VLMD-E 2-Way Blow Ceiling Cassette Indoor Unit The PLFY-P-VLMD-E cassette unit fits into the space in a suspended ceiling to provide heating or cooling. This new unit has been redesigned with lower unit height and lower noise levels.
PLFY-P20, 25, 32, 40, 50, 63, 80, 100VLMD-E Front View > Lower View Upper View > > Side View City Multi Range 2008 Dimensions > PLFY-P125VLMD-E > Rear View > Upper View > Lower View > PLFY-P-VLMD-E Side View Page 169
PMFY-P-VBM-E 1-Way Blow Ceiling Cassette Indoor Unit Utilising a compact and lightweight body, the unit is perfect for applications where ceiling space is limited. A total body weight of 14kg makes it one of the lightest available, latest fan technology also makes it one of the quietest.
PMFY-P20, 25, 32, 40VBM-E > > Lower View > Front View > PMFY-P-VBM-E Side View Upper View City Multi Range 2008 Dimensions Page 171
PEFY-P-VMS1-E Ultra Thin Ceiling Concealed Ducted Indoor Unit The ultra thin ceiling concealed ducted indoor unit offers increased flexibility and is particularly suitable for places where low noise operation is desired from a slimline body.
PEFY-P15, 20, 25, 32, 40, 50, 63 VMS1-E Upper View > Front View > Model A B C D 700 752 798 660 952 998 860 PEFY-P40-50VMS1-E 900 PEFY-P63VMS1-E 1100 1152 1198 1060 PEFY-P15-32VMS1-E E F 7 9 11 600 800 1000 PEFY-P-VMS1-E Side View > City Multi Range 2008 Dimensions Page 173
PEFY-P-VMM-E Ceiling Concealed Ducted Indoor Unit The PEFY-P-VMM-E ducted indoor unit is concealed within the ceiling space to allow unobtrusive air conditioning. Flexibility of duct layout allows air flow patterns to be arranged to suit any application.
PEFY-P20, 25, 32, 40, 50, 63, 80VMM-E Model A B C PEFY-P20-32VMM-E 652 772 1012 245 305 280 290 PEFY-P40-50VMM-E PEFY-P63-80VMM-E Side View D Upper View > Front View > E 710 684 830 804 1070 1044 > City Multi Range 2008 Dimensions PEFY-P100, 125VMM-E Upper View > 1252 370 370 360 360 1252 1284 1310 > Front View > 370 PEFY-P-VMM-E Side View 360 1252 Page 175
PEFY-P-VMH-E High Static Pressure Ceiling Concealed Ducted Indoor Unit With improved design flexibility as a result of increased external static pressure, the PEFY-P-VMH-E allows authentic duct air conditioning within the strictest aesthetic confines.
PEFY-P80, 100, 125, 140VMH-E Upper View > PEFY-P-VMH-E Side View > City Multi Range 2008 Dimensions Page 177
PCFY-P-VGM-E Ceiling Suspended Indoor Unit Designed for ultra-quiet operation and easy maintenance, the unit provides comfor table air conditioning for a wide range of applications where floor or wall space cannot be used practically.
PCFY-P40, 63, 100, 125VGM-E > Front View > Lower View > PCFY-P-VGM-E Upper View City Multi Range 2008 Dimensions Page 179
PKFY-P-VBM-E/VGM-E/VFM-E Wall Mounted Indoor Units An elegant design combined with compact dimensions and quiet operation make the PKFY-P an ideal unit choice. Noise levels are significantly reduced thanks to a unique airflow passage design that not only makes the unit one of the quietest in the industry, but also suppresses condensation and prevents mixing with secondary air.
Front View > Right Side View > Right Side View > PKFY-P32, 40, 50VGM-E Front View > PKFY-P63VFM-E Front View > Right Side View > Page 181 City Multi Range 2008 PKFY-P20, 25VBM-E PKFY-P-VBM-E / PKFY-P-VGM-E / PKFY-P-VFM-E Dimensions
PFFY-P-VLRM-E Floor Standing Concealed Indoor Unit A compact concealed unit providing simple, effective air conditioning in perimeter zones. The unit is easy to install and at only 220mm deep offers an unobtrusive method of delivering highly efficient air-conditioning performance.
PFFY-P20, 25, 32, 40, 50, 63VLRM-E Upper View Front View > > PFFY-P-VLRM-E Side View > City Multi Range 2008 Dimensions Page 183
PFFY-P-VLRMM-E Floor Standing Concealed Indoor Unit A compact concealed unit providing simple, effective air conditioning in perimeter zones. The unit is easy to install and at only 220mm deep offers an unobtrusive method of delivering highly efficient air-conditioning performance. I Reduced noise levels compared to the PFFY-P-VLRM-E version I Cooling operation set temperature can be set down to 14ºC db I Static pressure.
PFFY-P20, 25, 32, 40, 50, 63VLRMM-E Upper View Front View > > PFFY-P-VLRMM-E Side View > City Multi Range 2008 Dimensions Page 185
PFFY-P-VLEM-E Floor Standing Exposed Indoor Unit A compact cased unit providing simple, effective air conditioning in perimeter zones. The unit is easy to install, and at only 220mm deep offers an unobtrusive method of delivering a highly efficient air-conditioning performance.
PFFY-P20,25,32,40,50,63VLEM-E Upper View Front View > > PFFY-P-VLEM-E Side View > City Multi Range 2008 Dimensions Page 187
PFFY-P-VKM-E Floor Standing Exposed Indoor Unit The PFFY-P-VKM-E series is extremely versatile and is designed for wall attached installation at floor level. The auto swing vane provides a more natural and comfortable airflow throughout the room and the lightweight, compact design makes installation easy.
PFFY-P20,25,32,40VKM-E Upper View > Front View > > PFFY-P-VKM-E Side View City Multi Range 2008 Dimensions Page 189
GUF-50RD3 & GUF100RD3 Lossnay Outdoor Air Processing Indoor Unit The GUF-50RD3 and GUF-100RD3 outdoor air processing units can be used with any of the extensive range of City Multi indoor units to provide ventilation, dust removal, humidification and heat recovery.
GUF-50/100RD3 > Upper View Front View > > GUF-50RD3 and GUF100RD3 Side View City Multi Range 2008 Dimensions Page 191
PQFY-P VRF Heat Pump Boiler It is well known in the air conditioning industry that heat pumps are proven to provide highly efficient cooling. However, in line with other forward-thinking countries, such as Sweden and Switzerland, Mitsubishi Electric have now designed a heat pump boiler to provide heating and hot water, suitable for underfloor heating or swimming pools.
PQFY-P140 Front View > Upper View > Upper View > Front control panel not shown City Multi Range 2008 Dimensions PQFY-P250 Front View > PQFY-P Front control panel not shown Page 193
BC Controllers At the heart of both the R2 and WR2 Series, the BC controller makes simultaneous heating and cooling possible. It has the inherent ‘intelligence’ to be the system’s decision-maker.
CMB-P104, 105, 106V-G Upper View > Side View > CMB-P108, 1010, 1013, 1016V-GA/HA Upper View > Side View > Side View > City Multi Range 2008 Dimensions CMB-P104, 108V-GB Upper View > CMB-P104V-GB CMB-P108V-GB A B 3 3 180 420 CMB-P1016V-HB > Side View > BC Controllers Upper View Page 195
PAC-AH-M-G/H Heat Pump & Cooling Only Air Handling Unit Controller The Air Handling Unit Controllers are an interface to allow connection to third party manufacturer equipment. Mitsubishi Electric City Multi outdoor units can be used with this interface box, creating an ideal solution when a unique air handling unit is required. The Air Handling Unit Controllers are supplied with LEV expansion device(s).
Outdoor Units CMY-Y102S-G2 CMY-Y102L-G2 CMY-Y202-G2 CMY-Y302-G2 CMY-Y62-G-E CMY-Y100VBK2 CMY-Y200VBK2 CMY-Y300VBK2 CMY-R100VBK CMY-R200VBK ACH1 ACOUSTIC KIT - Branch Pipe (Joint) for size 200 or below - total capacity of indoor units - Branch Pipe (Joint) for size 201-400 - total capacity of indoor units - Branch Pipe (Joint) for size 401-650 - total capacity of indoor units or first branch of P500-P650 - Branch Pipe (Joint) for size 651 or above - total capacity of indoor units or first branch of P700-P1
Controls A comprehensive range of control options
The importance of The need for control is paramount in order to optimise the performance of any air conditioning system and minimise its running costs. Mitsubishi Electric offer a wide range of control options designed to do just this. Operating an air conditioning system without the right control can prove costly. It’s therefore important to ensure that every system is correctly specified to the degree of control it requires.
Control Controlled In accordance with the requirements of part L2 in the Building Regulations, our control systems provide the optimum control available, combined with the most efficient use of energy.
A wide range of Controls options The need for control is paramount in order to optimise the performance of any air conditioning system and minimise its running costs. Mitsubishi Electric offer a wide range of control options designed to do just this.
Contents 224 Remote Controllers 225 Programmable Timer 226 System Controller 227 Interfaces 228 G50 Controller, Centralised Controller 229 AG150 Controller, Centralised Controller 230 GB50 Controller, Centralised Controller 231 G50/GB50/AG150 Controller, Web Screenshots 232 G50/GB50/AG150 Desktop Remote Controller 233 G50/GB50/AG150 Third Party Equipment Interfaces 234 G50/GB50/AG150 Programmable Logic Controller (PLC) 235 TG2000 Software, PC Based Software Package 236 TG2000 Softwa
Remote Controllers Our air conditioning systems are supported by a multitude of remote controllers. Each remote controller type, whilst being able to support the general control and monitoring functions for a group of indoor units, can also offer other unique operational features.
Controls Range 2008 Programmable Timer Mitsubishi Electric controllers are complimented by a weekly programmable timer, being able to control up to fifty indoor units. The PAC-YT34STA also has hardwired connection available (On/Off input, fire alarm input, run output, fault output). PAC-YT34STA PAC-YT34STA PAC-SC50KUA Technical Information Programmable Timer DESCRIPTION Max No.
System Controller One system controller is available for use when you need to control up to fifty indoor units from one location. The PAC-SF44SRA also has hardwired connection available (On/Off input, fire alarm input, run output, fault output). PAC-SF44SRA PAC-SF44SRA PAC-SC50KUA Technical Information System Controller FUNCTION DESCRIPTION UNITS Max No.
A range of newly created interfaces are now available for use when connecting to third party controllers. TCB1 DIDO TCB1 DIDO Controls Range 2008 Interfaces Technical Information Interfaces TCB1 DESCRIPTION Control ON/OFF BUT CENTRALLY CONTROLLED ON/OFF control. Remote controller ON/OFF button deactivated ON/OFF BUT NOT CENTRALLY CONTROLLED ON/OFF control. Remote controller ON/OFF button activated TEMPERATURE SETTINGS Sets the groups temperature control.
G50 Controller Centralised Controller with WebServer Capabilities The G50 centralised controller was the first of its kind in the industry to utilise Ethernet Technology. By using Internet Explorer as its local or remote software, the G50 gives you instant access to all your control functions from the comfort of your own PC. The G50 can control up to 50 indoor units and can take the place of local remote controllers, offering the same level of monitoring and control.
NEW in September 2008 Touch Screen Centralised Controller with WebServer Capabilities The new AG150 Mitsubishi Electric centralised controller offers a large 9 inch touch screen display with easy control of up to 50 indoor units. The AG150 can calculate the energy used for each system, zone or indoor unit.
GB50 Controller Centralised Controller with WebServer Capabilities The GB50 has been developed to access all your control functions from the comfort of your own PC, without the need for a controller keypad or LCD display and at a very competitive price. M-NET GB50 ETHERNET PAC-SC50KUA Viewed using Microsoft® Internet Explorer Technical Information GB50 Controller FUNCTION DESCRIPTION OPERATION PLATFORM Pentium III, CPU 1000 Mhz, 256 MB RAM, 6GB or more.
Login Monitor Air Conditioning - Overview Access to the web pages is secured using a customised username and password. The first screen allows you to monitor all the units connected to the G50/AG150/GB50. Each icon displays On/Off, Faults and timer On/Off. Monitor Air Conditioning - Block view Remote Controller Settings Each area of the building can be displayed with information about On/Off, Setpoint, Mode and Temperature. Click on any icons in the Monitor View page to access the remote controller.
G50/AG150/GB50 Desktop Remote Controller More and more customers are using the G50/GB50 controller directly from their computers, so Mitsubishi Electric has launched a new, even simpler alternative which presents the customer with what looks like a standard remote controller interface - on their PC desktop.
The new third party equipment interfaces allow the user to monitor and control third party equipment from the G50/GB50 web pages. ETHERNET *NOTE 1 PAC-YG66DCA PAC-YG63MCA EQUIPMENT 1 EQUIPMENT 2 SENSOR 1 SENSOR 2 Technical Information Third Party Interfaces DESCRIPTION PAC-YG66DCA PAC-YG63MCA MAX No. OF INPUTS - 2 x Digital 2 x Analogue MAX No. OF OUTPUTS - 2 x Digital - MAX No.
G50/AG150/GB50 Programmable Logic Controller The PLC controller allows a hotel (for example) to have more accurate control over its air conditioning. The PLC works in conjunction with the key card system installed in each bedroom in many hotels. When the room is occupied, the PLC will switch ON the unit and reset the air conditioning to predetermined settings (for instance AUTO, 21ºC). When the room is unoccupied, the PLC will monitor the temperature in the room.
PC Based Software Package The TG2000 centralised PC based graphical software package allows the operator to control and monitor up to a maximum of 2000 indoor units. This software has been designed to connect directly to an air conditioning system via the G50/GB50 controller, allowing the operator the required functionality to control and monitor the complete air conditioning system from a central location.
TG2000 Software with Energy Monitoring PC Based Software Package The TG2000 centralised PC based graphical software package allows the operator to control and monitor up to a maximum of 2000 indoor units. This software has been designed to connect directly to an air conditioning system via G50/GB50 controller, allowing the operator all the required functionality to control and monitor the complete air conditioning system from a central location.
PC Based Software Package The TG2000 centralised PC based graphical software package allows the operator to control and monitor up to a maximum of 2000 indoor units. This software has been designed to connect directly to an air conditioning system via G50/GB50 controller, allowing the operator all the required functionality to control and monitor the complete air conditioning system from a central location.
TG2000 WAN (Wide Area Network) Software PC Based Software Package used to monitor and control multiple sites The TG2000 WAN centralised PC based graphical software package allows the operator to control and monitor up to a maximum of 1000 sites. Utilising the companies Wide Area Network, the complete (geographically distributed) air conditioning asset base can be controlled and monitored from a centralised location. PAC-YG66DCA WAN PAC-YG63MCA SITE 1 (i.e.
Display Whole Display Block The 2000 indoor units status may be shown on one screen. Block may be set for each area. Settings may be changed by one click of the mouse for each area. Display Floor Remote Controller Settings AutoCAD drawing may be imported to TG2000 to display floor screens. Click on any icons in the floor view to access the remote controller settings. Buttons on the local controllers may be locked (On/Off, Mode, Setpoint, Filter reset).
BEMS BACnet Interface ® Procon BAC-IP/50 TM To further enhance our complete open system network offering, we offer a BACnet gateway solution. Utilising the ASHRAE BACnet standard, complete control and monitoring integration can be achieved with up to 50 air conditioning units. ® ® M-NET *NOTE 1 ETHERNET PAC-SC50KUA BAC-IP/50 Technical Information BACnet INTERFACE ® FUNCTION BAC-IP/50 MAX No.
Controls Range 2008 BEMS BACnet Mr Slim Interface ® Procon BAC-A/50 TM ® A new BACnet Interface has been specially developed for the Mr Slim systems. The BAC-A/50 can control up to 50 individual systems. PAC-SK81SI BAC-A/50 Technical Information BACnet MR SLIM INTERFACE ® FUNCTION BAC-A/50 MAX No.
BEMS LonWorks Interface ® LMAP The Mitsubishi Electric LMAP continues to strengthen the ability of our products to interface with other third party building control systems using the globally recognised and accepted open network protocol Echelon LonWorks . LonWorks was introduced into the building services industry a number of years ago with the aim of establishing itself as the defacto communications standard.
Procon IP-32M / IP-50M / IP-100M TM To further compliment the existing control and interface product ranges being offered by Mitsubishi Electric to support their air conditioning systems, the Modbus range has been developed to accommodate the typical end-user needs as experienced within the UK market. M-NET *NOTE 1 ETHERNET PAC-SC50KUA Controls Range 2008 BEMS Modbus Interfaces Modbus IP-32M IP-50M IP-100M Technical Information MODBUS INTERFACES FUNCTION IP-32M IP-50M IP-100M MAX No.
BEMS Modbus Mr Slim Interface Procon A32M TM To further compliment the existing control and interface product ranges being offered by Mitsubishi Electric to support their air conditioning systems, the Modbus range has been developed to accommodate the typical end-user needs as experienced within the UK market. PAC-SK81SI Modbus A32M Technical Information MODBUS MR SLIM INTERFACE FUNCTION A32M MAX No.
Procon A1M TM To further compliment the existing control and interface product ranges being offered by Mitsubishi Electric to support their air conditioning systems, the Modbus range has been developed to accommodate the typical end-user needs as experienced within the UK market.
BEMS KNX-EIB Interfaces Procon KNX-EIB-IP-15/100 TM To further compliment the existing control and interface product ranges being offered by Mitsubishi Electric to support their air conditioning systems, the KNX-EIB range has been developed to accommodate the typical end-user needs as experienced within the UK market. M-NET *NOTE 1 ETHERNET PAC-SC50KUA KNX-EIB KNX-EIB-IP-15 KNX-EIB-IP-100 Technical Information KNX-EIB CITY MULTI INTERFACES KNX-EIB-IP-15 KNX-EIB-IP-100 MAX No.
Procon KNX-EIB-A-1 TM To further compliment the existing control and interface product ranges being offered by Mitsubishi Electric to support their air conditioning systems, the KNX-EIB range has been developed to accommodate the typical end-user needs as experienced within the UK market. KNX-EIB-A-1 KNX-EIB Controls Range 2008 BEMS KNX-EIB Splits Interface Technical Information KNX-EIB SPLITS INTERFACE FUNCTION KNX-EIB-A-1 MAX No.
M2M - Machine 2 Machine Interface Procon Maxi M2M-IP/50 TM To offer remote management of its air conditioning units to companies with large numbers of dispersed offices, Mitsubishi Electric has adopted the M2M platform. The machine-to-machine (M2M) technology platform allows customers to integrate multiple sites into one network. The air conditioning units as well as third party equipment will be wirelessly connected to the M2M server and use the GPRS network to communicate.
Procon Mini M2M-A/16 TM To offer remote management of its air conditioning units to companies with large numbers of dispersed offices, Mitsubishi Electric has adopted the M2M platform. The machine-to-machine (M2M) technology platform allows customers to integrate multiple sites into one network. The air conditioning units as well as third party equipment will be wirelessly connected to the M2M server and use the GPRS network to communicate.
M2M-Machine 2 Machine Web Screenshots MEUK Website Login M2M is accessible using MEUK website. A username and password is required to monitor and control sites. Monitor Active Alarms and Sites Status All sites are listed with active alarm sites. A site can be selected to monitor each system. Set Parameters Reports Indoor unit and third party equipment can be controlled from the Website. Reports can be generated for analysis.
Mitsubishi Electric can supply G50 control panels (surface or internally mounted). This allows easy installation. M-NET G50 Control Panel Controls Range 2008 G50 Control Panels Technical Information G50 CONTROL PANELS No. OF G50 No.
Run / Standby Control Panels The run/standby panel allows one system to run one week and the other one to run the other week. If one system fails, the run/standby panel will start the other one. If the temperature is too high, the panel will also start the 2 systems and enable an audible alarm. Run / Standby Control Panel Technical Information RUN / STANDBY CONTROL PANELS MODEL No.
Energy monitoring is key to the compliance with Part L2. To perform energy monitoring; a lot of different products are required. To optimise the time of installation, Mitsubishi Electric can now supply an energy monitoring panel with energy meter, current transformers, breakers and the interface to the Mitsubishi Electric communication network. Energy Monitoring Control Panel M-NET Power Supply Controls Range 2008 Energy Monitoring Control Panels Technical Information FUNCTION No.
Controls Range 2008 Split-System A2M Interfaces The City Multi systems use advanced communication protocol called M-NET. The Split-Systems can be interfaced to M-NET, allowing compatibility with the main centralised controller (G50, AG150, GB50, TG2000). An A2M adapter would be required per outdoor unit for Mr Slim and per indoor unit for Mr Slim S Series or M Series indoor units.
