Technical data

Device Overview
01750096767 F MEDIATE Kiosk System – Operating Manual 11
Operating Instructions
 Ensure that the correct power cord with safety approval is used (see chapter
“Appendix”, is as specified in the “Power Cord Selection”).
 Ensure that the AC power point is switched off before inserting the specified
power cord into the AC power point.
 Switch on the AC power point. The system is configured to start up upon
powered on.
 In the event that the system does not start up, switch off the AC power point.
Check all connectors to ensure that there are no loose connections before
switching on the system again. This may be due to the poor handling of the
system resulting in the loose connection.
 Do not attempt to open the system unless by authorized qualified personnel.
 If the problem persists, switch off the AC power point. Disconnect the power
cord from the AC power point. Contact the Technical Support for assistance.
The device may only be repaired by the authorized qualified
personnel. Unauthorized opening of the device and repairing works
may not only seriously jeopardize the safety of the user but also
cancel all the warranty and liability agreements.
!