Operating instructions

Overview of the Control Panel (cont.)
Q
®
®
®
program timer indicator (PROGRAM TIMER)
This indicator lights up in green when you turn the TV on. It
blinks in green when the TVis powered off and the timer has
been set.
power button (POWER)
Use to turn the TV on or off.
volume controls (VOLUME A, V)
Press the up (•) button to turn up the volume. The down (V)
button turns down the volume.
channel controls (CH. • V)
Use the up (A) button to switch to a channel with a higher
number and the down (Y) button to switch to a channel with a
lower number.
(_) audio/video reset (AV RESET)
Press to reset audio and video functions to their original factory
adjustments or setting except for volume, the "Listen to"
function (stereo/SAP/mono), speaker (off/on), background
(black/gray), Instant Info and closed captic,ning.
_) input button (INPUT)
Use to select the input source you wish to view:
• TV channels on Antenna A (ANT-A) or Antenna B (ANT-B)
and/or
• other equipment connected to Input 1, 2, or 3 (for some
models)
(_) S-video input terminal (C8-27609, CS-36609, and C8-
40509 only)
Use to connect the S-video output of a camcorder or other
component to the TV. If you connect the S-video cable to this
terminal, the adjacent video input termiaal cannot be used.
® video input terminal (CS-27609, CS-36,_09, and CS-40509
only)
Use to connect the video output from a standard camcorder or
other component to the TV.
(_ audio input terminals (CS-27609, CS-36609, and C$-40509
only)
Use to connect the audio output from a camcorder or other
component.
@) degauss button (DEGAUSS)
Use this button to correct color impurity.
(_) color purity adjustment switches (C,S..36609 and CS-
40509 only)
Set these switches according to the placement and position of
your TV. See "adjusting the color purity" in Chapter 3.
Overview of the Control Panel 13