Operating instructions

Important:

procedure

(See illustration on the following page.)

O Connect the incoming cable to the IN terminal on the decoder

box.

Connect a coaxial cable to the OUT terminal on the back of the

decoder box; connect the other end of this cable 1_othe AN-

TENNA-IN terminal on the back of the VCR.

Connect the second coaxial cable to the ANTENNA-OUT termi

hal on the back of the VCR. Connect the other e:ad of this cable

to the antenna terminal on the back of the TV.

Connect an RCA pin-type video cable to the VIDEO OUT termi-

nal on the back of the VCR. Connect the other end of this cable

to the VIDEO INPUT terminal on the back of the television.

If you are connecting a Super VHS (S-VHS) VCR, u,3e a Super

Video cable instead of an RCA pin-type video cable. Connect a

Super Video cable to the S-VIDEO OUT terminal on the VCR.

Connect the other end of this cable to the S-VIDEO INPUT termi-

nal on the back of the television.

Connect a set of RCA pin-type audio cables to the AUDIO OUT

terminals on the back of the VCR. Use the red cable to connect

the right (R) channel and the white cable for connecting the left

(L) channel.

Connect the other ends of this cable to the AUDIO INPUT

terminals on the back of the television.

If your VCR is monaural (non-stereo), you will only connect a single

RCA pin-type audio cable. Connect the cable to _;he VCR, then

connect the other end to the L (LEFT) audio input on the back of

the television.

If your VCR has the video channel switch, set to 'GFF/AV" mode.

See your VCR's owner's guide for details.

Set the VCR to the playback mode.

To view the VCR, select the external input source by using the

INPUT button on the control panel or remote ccntrol.

Basic Connections 35