Operating instructions

Changing channels (cont.)
using the QuickView option
The QuickView feature can work
in two ways: to recall the last
channel viewed (Last Channel
Recall), or to recall a channel you
put into QuickView memory.
If you have not memorized any
channels into QuickView
Memory, Laser Channel Recall
allows you to use the QV button
to switch back and forth b_-
tween the curcent channel and
the last one viewed.
QuickView Memory allows
you to use the QV button to
switch back and forth between
the last channel you were
watching and the channel you
put into QuickView memory.
_Important:
Setting the QuickView memory
0 Tune to the channel you wish to memorize.
Press and hold the QV button for about 2 seconds. The channel
numbers and a QV indicator will appear on the screen, indicat-
ing that you have memorized that channel.
After changing to another channel, press the, QV button to
immediately return to the memorized channel.
If you press the QV button while watching the memorized
channel, you will return to the last channel _4ewed.
The memorized QV channel will remain in memors' until you
replace it with a new channel using the procedure above. Once a
channel has been programmed as a QV channel, you cannot use the
QV button to switch between the current and the, last viewed
channel an/ess you re-select the current channel as the QuickView
channel.
52 Chapter 3: Operating Your TV