Operation Manual

–
12
–
EN
1L25
CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER
If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the DVD
player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL AUDIO OUT jacks. 5.1
channel Dolby Digital Surround sound can also be output from the 5.1 CH OUTPUT jacks. (They do not output the DTS
sound.) By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience
with powerful and high-quality surround sound of a professional standard, which can be heard in movie theaters.
Use an audio coaxial or optical digital cable (not included) for the audio connections.
Use audio cables (commercially available ) for the 5.1 CH audio connection.
OPTICAL COAXIAL
R
L
VIDEO
YCr
Cb S
SCAN MODE
VIDEO OUT
IP
AUDIO OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Y
Front speaker
(left)
Center speaker
Front speaker
(right)
Surround
speaker
(left)
Surround
speaker
(right)
but not both
To VIDEO
INPUT jack
To VIDEO OUT jack
To S-VIDEO INPUT jack
To S-VIDEO OUT
jack
To COAXIAL DIGITAL
AUDIO OUT jack
To COAXIAL DIGITAL AUDIO
INPUT jack
Dolby Digital or
DTS decoder
To OPTICAL DIGITAL
AUDIO INPUT jack
To OPTICAL DIGITAL
AUDIO OUT jack
or
Subwoofer
[Fig. 4]
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
Notes
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Owner’s Manuals for the components to be connected to the DVD player.
¡If output is Dolby Digital audio, connect to a Dolby Digital decoder and set Dolby Digital to ON for audio
output in the setup mode.
¡If you want to enjoy DTS audio, use a DIGITAL AUDIO OUT jack for the connection. (DTS can only be
output through the DIGITAL AUDIO OUT jacks.)
¡If output is DTS audio, connect to a DTS decoder and set DTS to ON for audio output in the setup mode.
¡Unless connected to a Dolby Digital decoder or a DTS decoder, set Dolby Digital or DTS to OFF for audio
output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion and may also
damage the speakers.
“DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
OPTICAL COAXIAL
R
L
VIDEO
YCr
Cb S
SCAN MODE
VIDEO OUT
CENTER
SUBWOOFER
L
R
SURROUND
R
FRONT
L
ANALOG
5.1 CH
AUDIO OUT
IP
AUDIO OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Stereo system
To COMPONENT VIDEO
INPUT jack (red, green, and blue)
To Right (red) and Left (white)
AUDIO OUT jacks
To ANALOG AUDIO
INPUT jacks
CONNECTING TO A TV OR A STEREO TV THAT HAS
COMPONENT VIDEO IN JACKS
[Fig. 5]
OPTICAL COAXIAL
R
L
VIDEO
YCr
Cb S
SCAN MODE
VIDEO OUT
CENTER
SUBWOOFER
L
R
SURROUND
R
FRONT
L
ANALOG
5.1 CH
AUDIO OUT
IP
AUDIO OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Y
Front speaker
(left)
Center speaker
Front speaker
(right)
Surround
speaker
(left)
Surround
speaker
(right)
To VIDEO INPUT jack
or
To S-VIDEO INPUT jack
To 5.1 CH INPUT jacks
Amplifier with
5.1 ch input terminal
Subwoofer
To VIDEO OUT jack
To S-VIDEO OUT jack
To 5.1 CH
AUDIO OUT
jacks
E5732UD.qxp 03.5.13 20:14 Page 12