Service manual

6. Removal Instruction Sheet of Bezel and Back cover
6-1
1. Introduction
Please prepare jig for removal.
• Please use as a jig what turned up about 20~30 mm
of tapes for crack prevention and stuck them on the
tip of a steel board with approx. a thickness of 0.5~
0.8 mm a width of 15mm, and a length of 150 mm.
(As the example, we used ruler made from steel as
shown in photograph.)
2. Structure Details of Bezel and Back Cover
Bezel
Back Cover
Screw
<left and right 2 places>
Insertion pin <"a" 12 places>
hook <"b" 2 places>
Double sided tape
<2 places>
hook <3 places>
"a"
"a"
"a"
"a"
"a"
"a"
"a"
"a"
"a"
"a"
"a"
"a"
"b"
"b"
Insertion hole for hook
<left and right 2 places>