Service manual

The A section is pushed pressing down
hook of this portion.
(Right and left are simultaneously)
A
(3) Hooks are removed by considering the penetration hole (three places) of the front upper part
of Back Cover as a mark, inserting a jig from the direction of an end. and pushing in a jig
downward.
Penetration hole
Screw
<left and right 2 places>
Hook
Penetration hole
<3 places>
6-3
4. Removal Instruction for Back Cover
(1) The screws of the two places of the lower parts of the Back Cover are removed.
(2) Two hooks of the front lower part of Back Cover is pressed down, and the lower part of Back
Cover is removed.