Service manual

14 /

VSP-C0486

5.7 Misconvergence

Area A: <= 0.25 mm within the 297mm diameter circle

Misconvergence

Area B: <= 0.35 mm within 396mm x 297mm

*With White-Crosshatch applied.

*Zone A is a circular area with 297mm diameter at the center.

*Zone B is a rectangular area (396mm x 297mm) outside of the zone A.

*Use worst-case horizontal/vertical misconvergence between any two primary colors.

5.8 Focus

<=1600x1200 85Hz

Displaying 7 x 9 pixel "e" with white single pixel

Strokes, the entire screen shall be readable with clearly

discernible characters at normal viewing distance.

>1600x1200 85Hz

Displaying 7 x 9 pixel "H" with white single pixel

Strokes, the entire screen shall be readable with clearly

discernible characters at normal viewing distance.

5.9 Raster Regulation

Rater Size Regulation

<= 0.5% of the horizontal or vertical picture size

*The picture size change is less than adjusted value in either the horizontal

or vertical direction over 30% to 100% luminance range and 90 - 132VAC

or 198 - 264VAC Input respectively.

Area B

rea A