Service manual

16 /
VSP-C0486
7. Environmental Conditions
7.1 Temperature, Relative Humidity
Operating Storage and shipment
Temperature 5 – 35 degree C -20 - 60 degree C
Relative Humidity
10 - 90%
Without condensation
10 - 90%
Without condensation
7.2 Vibration Test (with carton box)
1) Random Vibration
Test Axis
3 axis
Search Frequency 5 - 200Hz
Acceleration 0 - 14.406m/s2rms
Dwelling Time 30 minutes x 3 axis
Mounting Fixed firmly on the vibration table
7.3 Drop Test (with carton box)
The inside unit shall be withstand without any damage by following procedure.
Drop to the hard wooden board from the position of the following heights.
After finish the drop test of edges (3 position) and also corners (2 position),
tester has to change to new cushion. However for the carton box,
tester must not change to the new box and use the damaged box continuously.
Position Height
Edge 1,2,3 46.0cm(18inch)
Corner 4,5 46.0cm(18inch)
Other Surfaces A, B, C, D 46.0cm(18inch)
Top Surface E 46.0cm(18inch)
Bottom Surface F 46.0cm(18inch)
A
D
Front
5 3 F
1
4
2
B
C
E