Service manual

2 - 17
H-STATIC
V-STATIC
Adjustment item name Problem
Adjusting the center misconvergence and axial misconvergence
Adjustment point Adjustment procedure
Adjust to +/- 0.1mm or less
with CP-ASSY 4P.
Adjust so that TOP+BOTTOM
are +/- 0.1mm or less with YH
volume.
Adjust so that LEFT-RIGHT is
+/- 0.1mm or less with XH
slider.
Only when XV (B-Bow) is +/-
0.15mm or more, adjust so
that LEFT-RIGHT is +/-
0.15mm or less with the
interlock of B-Bow 4P and
CP-ASSY 4P.
Adjust so that LEFT+RIGHT
is +/- 0.15mm or less with XV
differential coil.
XH axial deviation
YH axial deviation
YV axial deviation
XV characteristics
XV axial deviation
RB
B-Bow 4p and CP-ASSY 4p Correction Method XH Slider
DY Board
B-Bow 4p
CP-ASSY 4p
XH Slider
CRT DY
Front
Rear
(Viewed from neck side)
DY Board
Adjustmennt stick
(Viewed from top side)
(Top of DY)
YH(a)
YH(t)
(Side View)
(Push or Pull)
Adjustment making much of
horizontal trapezoidal distortion
Adjust optimally using DY
left/right shaking YV volume.
The remaining YV
misconvergence should be
adjusted with DDCP.
XV Dif. Coil: XV (t)
TRD