AUTO-SCANNING WITH DIGITAL CONTROL COLOR DISPLAY MONITOR USER S GUIDE For future reference, record the serial number of your display monitor in the space below: SERIAL No. The serial number is located on the rear cover of the monitor. Internet Home Page: http://www.necmitsubishi.com/ ® Supplying Windows 95/98/2000 INF File download service, new product information, etc.
RADIO INTERFERENCE REGULATIONS STATEMENT FOR U.S.A. As an ENERGY STAR Partner, NEC-Mitsubishi Electronics Display of America,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO’99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.
CONTENTS 1.1 Features ........................................................ 1-2 CAUTION 1.2 Internal Preset Memory Capability ................ 1-3 The power cord provided with this monitor is designed for safety and must be used with a properly grounded outlet to avoid possible electrical shock. 1.3 Power Management Function ....................... 1-3 Do not remove the monitor cabinet as this can expose you to very high voltages and other hazards. 1.6 Cleaning Your Monitor ........................
1 INTRODUCTION Congratulations on your purchase of the high resolution color monitor. We designed this monitor to provide you with years of reliable trouble-free operation. • The world's standard DIAMONDTRON NF CRT upgraded and pure picture images. • The monitor complies with Video Electronics Standards Association (VESATM) DDCTM2B and 2Bi (EDID) specification. If your computer is Plug & Play compliant setup will be done automatically.
1.2 1.5 Internal Preset Memory Capability Location Considerations When setting up and using the monitor, keep the following in mind: • For optimum viewing, avoid placing the monitor against a bright background or where sunlight or other light sources may reflect on the display area of the monitor. Place the monitor just below eye level.
1.7 1.9 Quick Operation Chart Unpacking To summarize the steps in connecting your computer with the color monitor and setting the necessary controls and switches, refer to the chart below. After you unpack the box you should have all of the items indicated in Figure 1. Save the box and packing materials in case you transport the monitor. 1 2 Connect the color monitor and computer with the necessary cords and cables. See Section 3. INSTALLATION AND CONNECTION 4 3 5 Turn on the color monitor.
2 PART NAME ENGLISH 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. 1 1 2 3 4 5 FRONT SIGNAL A/B − OSD OFF SIGNAL-B + SIGNAL-A 6 8 7 9 REAR 10 Figure 4 Figure 3 2.2 Function 1. POWER SWITCH: A push-on / push-off switch for AC power. 5. 2.
3.2.2 Connecting to An Apple Macintosh Computer 3 INSTALLATION AND Figure 6 shows the SC-B110 cable and AD-A205 Adapter(option) to the video port in an Apple Macintosh. CONNECTION For Macintosh Adapter AD-A205, contact your dealer. On the back of the monitor three kinds of plug-in connections are provided: AC power connector for the AC input, two DB9-15P connectors for video signal input, and USB ports for USB communication. 3.1 1. 2. AC Power Connection 3.
3.2.3 Connecting to two computers Figure 7 shows the connection to two computers. Refer to clause 3.2.1 or 3.2.2 for the connection procedure. ENGLISH SIGNAL-B SIGNAL-A Computer A Computer B Signal Cable Signal Cable Figure 7 3.3 USB System Basic Application REAR SIGNAL-B SIGNAL-A Downstream Ports USB Cable Upstream Port Signal Cable Keyboard Camera Scanner Computer NOTE The Computer is required to have Windows® 98 or later installed and USB functions.
3.4 Installation of USB Function (a) Disconnect and connect the USB cable to the upstream port of the display monitor. (b) Cycle power of the display monitor off then on. The following procedure permits your computer to recognize or "enumerate"(A USB term) the USB HUB. 1. Power on the display monitor and then the computer. 2. Start "Enumeration" from the Windows® Desktop. NOTE If the mark appears with “Generic USB HUB”, then enumeration was unsuccessful.
4 ENGLISH 4.1 OSD (On Screen Display) FUNCTIONS How to adjust the screen The monitor has an OSD(On Screen Display) function. The following procedure shows how to adjust the screen using the OSD function.
4.2 X: Available Adjustment Items Group Icon Press the Plus Button Press the Minus Button Item Icon A B C Item − + To decrease the contrast. To increase the contrast. X X X BRIGHT To decrease the brightness. To increase the brightness. X X X COLOR To select preferable display color mode. And, to adjust the color balance at the selected color mode. CONTRAST (COLOR) − + NOTE X X X When selecting mode "sRGB", "COLOR TEMPERATURE", "CONTRAST" and "BRIGHT" are unavailable.
X: Available Group Icon Press the Minus Button Item Icon A B C − − + + CORNER PURITY(TL) To adjust the purity condition on the top-left corner. X X X CORNER PURITY(TR) To adjust the purity condition on the top-right corner. X X X CORNER PURITY(BL) To adjust the purity condition on the bottom-left corner. X X X CORNER PURITY(BR) To adjust the purity condition on the bottom-right corner. X X X MOIRE CANCEL LEVEL To decrease the level of the moire-clear wave.
5 Before calling your Authorized Product Support, please check that the items below are properly connected or set. In case of using a non-standard signal, please check the pin assignments and the signal timing of your computer with the specification outlined in Section 6. SPECIFICATIONS and Section 7. APPENDIX. TROUBLESHOOTING PROBLEM ITEMS TO CHECK LOCATION • Contrast and brightness controls. • Front • Power switch. • AC power cord disconnected. • Front • Rear • Signal cable disconnected.
ITEMS TO CHECK PROBLEM Abnormal Picture • Thin vertical black lines on one or both sides of the • screen. This minor condition is caused by grille element • overlap which can occur during shipping. ENGLISH Black vertical lines are visible on the screen. LOCATION • Position an open white window over the affected area of the screen and maximize the brightness and contrast controls. This will cause localized heating of the overlap which will clear in a few minutes.
6 SPECIFICATIONS CRT Size 55cm/22" (508mm/20" Viewable Image Size) Mask type Aperture grille Gun In-line Deflection angle 90° Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0.24mm Phosphor pitch 0.25mm Face Plate G-WARAS Focusing method Dynamic Beam Forming (DBF) INPUT SIGNAL Video Sync 0.7Vp-p analog RGB Separate H, V sync., Composite sync., or Sync on Green SIGNAL INTERFACE Input Connectors Input Impedance DB9-15P X 2 75Ω (video), 2.2kΩ (sync.
7 Monitor Signal Input Connector (DB9-15P) 7.2 (Female) SC-B110 Signal Cable Approx. 1.8m 2 1 DB9-15P 6 12 MOUNTED ON THE REAR PANEL 4 3 9 8 7 11 13 5 10 14 15 DB9-15P(Male) DB9-15P(Male) PIN ASSIGNMENTS Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 PIN ASSIGNMENTS Signal RED VIDEO GREEN VIDEO BLUE VIDEO GROUND DDC GROUND RED GROUND GREEN GROUND BLUE GROUND NC SYNC GROUND GROUND SDA HORIZONTAL SYNC or COMPOSITE SYNC VERTICAL SYNC(VCLK) SCL 14 15 Pin No.
-1-16 - 1,2 1,2 3,4 IIvi IIvx Macintosh 3,4 1,2 2,4 1,2 3,4 2,4 2,3 1,2,3,4 1,2,3,4 1,2,3,4 2,3 3,4 2,4 3,4 3,4 1,2,6 1,2,6 1,2,6 1,2,6 2,4 3,4 1,2 1,2,6 2,4 3,4 1,2 3,4 1,2 3,4 3,4 1,2 3,4 Centris 610 650 1,2,6 1,2,6 1,2,6 1,2,6 1,2,6 1,2,6 1,2,6 1,2,6 1,2,6 3,4 1,2,6 1,2,6 1,2,6 3,4 3,4 3,4 1,2,6 3,4 6100 6100AV 8100 7100AV 6100AV 8100AV 7100AV AV 8100AV Video Card DRAM (DB-15) Video Port (HDI-45) 6410 Workgroup 8100 Server VRAM 6420 8150 Video Card 9150 (D
Registration To learn about other special offers, register online at, http://www.necmitsubishi.com/productregistration Limited Warranty NEC-Mitsubishi Electronics Display of America, Inc. (hereinafter "NMD-A") warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NMD-A's sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase.
CP871C200A40 NEC-Mitsubishi Electronics Display of America, Inc. 1250 North Arlington Heights Road, Itasca, Illinois 60143-1248, U.S.A.