Specifications

24
MENU ITEMS
The MENU is used to set the following items. The settings can be saved or changed by pressing
SET button.
WB Adjusts white balance.
COLOR Adjusts color of the print image.
SHARP Adjusts image outline.
LCD Adjusts color and brightness of the LCD
CAPTURE Sets flash and shows the settings made by an installer.
MODE Sets resolution of an image.
TRIM Sets the printing area of an image.
S.MENU Opens the sub menu.
RESET Resets the above items to the settings made by an installer.
< EXIT Exits this menu.
OPERATING MENU
Use the buttons on the camera to display MENU and select and set
functions.
1 Press CAMERA/PLAY button to switch the camera to
CAMERA mode.
In CAMERA mode, mark is displayed on the upper right of
the LCD.
2 Press SET button for more than 3 seconds.
MENU is displayed.
3 Select the desired item by pressing T (+) or W (-) button.
In the right figure, COLOR is selected.
4 Press SET button to open the item.
When you select S.MENU, see page 30.
5 Press T (+) or W (-) button to select the sub item.
In the right figure, “a” is selected.
CAMERA mode