Instruction manual

28
7.5 Block… Command
Clicking the Block... command in the Search
menu opens the following window (Figure 7.5). Searches can
be made by selecting the desired block from the list box and clicking the Seach
button. This function does not work during the communication mode.
Figure 7.5 Block Search
Note:
When accessing from peripheral devices with large amount of recording blocks such
as DDS-2 or DDS-3 to a PC with a slow CPU or a small amount of on-board memory, it
may take a long time to open the Block search window.
The list box contains the block number, its recording start time,
its recording end time, the flag,
and the camera number. The following table indicates symbols used in the flag field
and their meanings.
Flag Meaning
A
Contains an alarm-recorded frame
S Contains an alarm-recording start frame
C Contains a comment-recorded frame
T Contains a shot-recording frame