Instruction manual

20
Connections (continued)
Clamping the cables
step
1. Put the supplied cable clamping band into the
clamper hole on the rear panel.
• There are 2 clamper holes on the unit, for power
cable and USB cable.
step
2. Put the cable to be clamped through the cable
clamping band as illustrated below.
• Face the serrated surface of the band inside.
step
3. Pull the edge of the cable clamping band until it
stops.
Connecting to an analogue video cassette recorder
To VIDEO IN
connector
To AUDIO IN
connector
Analogue video cassette recorder
To VIDEO OUT
connector
To AUDIO OUT
connector
Commercially available audio cable
Commercially available video cable