Instruction manual

ENGLISH

Step

4 Disconnect 2 cords connected to the circuit

board on the metal part.

Step

5 Remove the metal part.

• Remove 4 screws on the metal part.

Step

6 Pull out the HDD tray halfway.

HDD 1

HDD 2

Step

7 Remove the cords.

Notice

• Because S-ATA connectors of HDD are very delicate,

connect or disconnect the cords gently without

applying excessive force to the connectors.

Take special care to connect or disconnect the

connectors straight in order to prevent vertical force

from being applied to them.

S-ATA connectors

Step

8 Pull out the HDD tray.

• Pull out the HDD tray completely.

Step

9 Remove the HDD.

• Remove 4 screws securing the HDD and then

remove the HDD from the frame.