Instruction manual
Beginning
15. PTZ (Pan, tilt, and zoom) button
Switches this unit to PTZ mode to control the PTZ cam-
era connected.
Camera control buttons
The following buttons control PTZ motion during PTZ
mode. This unit must be in single screen display.
CAMERA ZOOM button
Adjusts the camera zoom. Press this button and then
turn JOG to the left (wide) or right (tele) to adjust the
camera zoom.
FOCUS button
A
djusts the focus of a camera. Press this button and
then turn JOG to the left (far) or right (near) to adjust the
focus.
IRIS button
Adjusts
the iris of a camera. Press this button and then
turn JOG to the left (close) or right (open) to adjust the
iris.
PRESET button
Presets
up to 16 viewing positions. Press this button and
then press the camera number button within 3 seconds
to preset the points.
AUT
O PAN button
Activates auto pan of the camera connected.
16. OUTPUT A/B button
Switches the multiplexer output between A and B. The
light turns off when OUTPUT A is selected and on when
OUTPUT B is selected. It affects both, playback and
search functions. The menu cannot be displayed when
this button is illuminated.
TILT button
When pressing the button during PTZ mode, the angle
of the camera adjusts to the downward direction.
17. Disc loading slot
Accepts DVD disc or CD to copy/back up.
The supported discs are:
DVD-R
W, DVD-R, CD-R, and CD-RW
OPEN/CLOSE button
Opens or closes the disc loading slot.
BUSY indicator
Flashes or illuminates during recording or playback.
18. LCD display
Displays the present time and the status of the unit.
19. SHUTTLE ring
Adjusts the playback speed, and rewinds or forwards the
recorded pictures.
Pans the camera.
20. JOG dial
Forwards or rewinds the picture during playback (frame-
by-frame).
Uses for controlling PTZ cameras connected.
21. Camera number buttons (1 to 16)
Displays the picture supplied from the camera connect-
ed. The number of the button corresponds to that of the
CAMERA IN connector on the rear panel. The button of
the displayed camera number lights up.
Used for the preset function of the PTZ camera control.
Used for the menu settings.
M-DET DOT ON/OFF/M-DET AREA SET UP
(camera number 9 and 13)
Used for setting the detection area of the motion detec-
tion function.
13