Instruction manual

ManualsBrandsMitsubishi ManualsMusical equipmentDX-TL800E

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

◆ TIME DATE ADJUST

See page 11, 12.

■ DISPLAY MODE

Display format of the date and current time can be set.

TIME DATE ADJUST

DISPLAY MODE 1

CLOCK LOCATION SETTING

CAMERA DISPLAY NUMBER

CAMERA TITLE/MEMO SETTING

DUPLEX MODE DISPLAY BOTTOM

<MODE1>

01-01-2002 00:00:00

Setting ( default : “1” )

“1” : Displays the month/date/year, current time.

“2” : Displays the month/date/year, day of week,

current time, recorded interval (playback only).

“3” : Displays the date, day of the week, time, re-

corded interval (playback only), HDD usage space

(during recording/playback only if CAPACITY RE-

MAIN is set to HDD), and alarm recording number

(during alarm recording/playback).

“4” : No indication.

(When alarm signal is input, Displays the month/

date/year, day of week, current time. )

“5” : No indication.

(When warning signal is input, Displays warning

message. )

“6” : No indication.

01-01-2002 00:00:00

01-01-2002 TUE

00:00:00 12.5P

<MODE1>

<MODE2>

01-01-2002 TUE

00:00:00 12.5P 99% A00001

<MODE3>

1. Press the SET UP button

}

}

Select

“DISPLAY MODE” in the <TIME DATE/DISPLAY SETTINGS>

screen. Display the desired setting and confirm.

2. Turn the SHUTTLE ring counterclockwise or press the SET

UP button.

■ CLOCK LOCATION SETTING

The display positions of the date and current time can be

set.

1. Press the SET UP button

}

}

Select “CLOCK

LOCATION SETTING” in the <TIME DATE/DISPLAY

SETTINGS> screen and turn the SHUTTLE ring clockwise.

• The <

CLOCK LOCATION SETTING

> screen appears.

••01-01-2002•00:00:00•••••••••••

••••••••••••••••••••••••••••••••

2. Use the , , and buttons and the JOG dial to move

the cursor to the desired display position and turn the

SHUTTLE ring clockwise.

• The setting is confirmed.

The cursor can be continuously moved vertically

by turning the JOG dial.

3. Turn the SHUTTLE ring counterclockwise or press the SET

UP button.

■ CAMERA DISPLAY

Setting can be made to display the title and memo set in

“CAMERA DISPLAY” , camera number. only, etc.

TIME DATE ADJUST

DISPLAY MODE 1

CLOCK LOCATION SETTING

CAMERA DISPLAY NUMBER

CAMERA TITLE/MEMO SETTING

DUPLEX MODE DISPLAY BOTTOM

<MODE1>

01-01-2002 00:00:00

Setting ( default : “NUMBER” )

“NUMBER” : Only the camera number is displayed.

“TITLE” : The title set in “CAMERA TITLE/MEMO

SETTING” is displayed. The title can also be re-

corded along with the video.

“COMMENT” : The comment set by RS-232C con-

nection is displayed.

“NONE” : No display.

1. Press the SET UP button

}

}

Select

“DISPLAY MODE” in the <TIME DATE/DISPLAY SETTINGS>

screen. Display the desired setting and confirm.

2. Turn the SHUTTLE ring counterclockwise or press the SET

UP button.

■ CAMERA TITLE/MEMO SETTING

Titles can be set individually to each connected camera.

When selecting “TITLE” in “CAMERA DISPLAY”, the title,

such as the location of the camera, will appear on the

screen for an easy-to-understand monitoring system.

The maximum number of characters for the title

is 16. The number of characters displayed on the

screen : all 16 for single screen, first 10 for SPLIT4,

and first 6 for SPLIT9.

Example : When setting titles of “ENTRANCE” and “COUN-

TER” to camera number “

” and “

”4, respectively,

and setting memo of “BANK”.

1. Press the SET UP button

}

}

Select

“CAMERA TITLE/MEMO SETTING” in the <TIME DATE/

DISPLAY SETTINGS> screen and turn the SHUTTLE ring

clockwise.

• The <CAMERA TITLE/MEMO SETTING> screen appears.