Instruction manual

34
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
<TIMER PROGRAM SETTINGS>
■ TIMER PROGRAM SETTINGS
Up to 3 most used operation patterns can be set in ad-
vance. By individually setting the camera, recording inter-
vals and recording picture quality for normal recording/alarm
recording to A ~ D, settings can be changed instantly by
switching operations and is very convenient.
！
Before recording, accurately set the date and
current time (for setting the date and time,
see
pages 11,12).
■ TIMER PROGRAM
♦ Structure of the <TIMER PROGRAM> screen
<TIMER PROGRAM> P1
DW START END MODE M-DET
>> 1 --- --:-- --:-- ---- ---
2 --- --:-- --:-- ---- ---
3 --- --:-- --:-- ---- ---
4 --- --:-- --:-- ---- ---
5 --- --:-- --:-- ---- ---
6 --- --:-- --:-- ---- ---
7 --- --:-- --:-- ---- ---
8 --- --:-- --:-- ---- ---
SPL SAT-SUN
1) 2) 3) 4) 5) 6) 7) 8)
9)
1) PROGRAM NUMBER
Up to 8 programs can be set for a single operation.
2) DW
The day of week from “SUN” to “SAT” can be set.
“DAY” : When recording at the same time daily.
“SPL” : When recording the period specified in “9) SPL (spe-
cial day of the week setting)” below.
“HOL” : When setting holidays specified in the <HOLIDAY
SETTING> screen.
3) REC START TIME
The time is indicated using the 24-hour system.
！
If there is an overlap in the reservation time, the
program with the larger program number is given
priority for recording.
4) NEXT DAY
This mark appears when recording is to be carried over to
the following day.
5) REC END TIME
6) MODE
“A” ~ “D” : When recording using the camera operation type
and recording intervals set in “REC MODE A” ~ “REC MODE
D” of the <TIMER PROGRAM SETTINGS> screen (for de-
tails concerning REC mode settings,
see pages 12-
14).
“SKIP” : When temporarily skipping timer recording (the
recording will not be made for the specified time frame of
that program number).
7) M-DET
The motion detection function can be set on/off.
8) Select timer setting number (P1 ~ P3) is displayed.
9) SPL (special day of the week setting)
The start day of the week and end day of the week are
set. When selecting “SPL” in “DW”, the period from the
start day of the week and end day of the week set here
are active.
Example : Using program 1 in <TIMER PROGARAM>
P2, REC MODE A will record to Wednesday ~ Saturday
from 12:30 to 13:00 and “M-DET” is set to “ON”.
1. Select SET UP button } <SETTINGS> } <TIMER
PROGRAM SETTINGS> screen.
<TIMER PROGRAM SETTINGS>
>> SELECTED PATTERN P1-SET
HOLIDAY SETTING
REC MODE A NORMAL
&
ALARM-SET
REC MODE B NORMAL
&
ALARM-SET
REC MODE C NORMAL
&
ALARM-SET
REC MODE D NORMAL
&
ALARM-SET
ALARM REC DURATION 5S
PRE ALARM REC SHORT
2. Check to see that the cursor is to the left of <TIMER
PROGRAM> and turn the SHUTTLE ring clockwise twice.
• The “P1” display reverses in color when the SHUTTLE ring
is turned the first time. When the ring is turned for the second
time, the background turns red and flashes.
3. Turn the JOG dial to select “P2” and turn the SHUTTLE
ring clockwise.
• The setting is confirmed and flashing stops.
4. Turn the JOG dial clockwise to reverse display “SET” and
turn the SHUTTLE ring clockwise.
• The <TIMER PROGRAM> screen appears.
<TIMER PROGRAM> P2
DW START END MODE M-DET
>> 1 --- --:-- --:-- ---- ---
2 --- --:-- --:-- ---- ---
3 --- --:-- --:-- ---- ---
4 --- --:-- --:-- ---- ---
5 --- --:-- --:-- ---- ---
6 --- --:-- --:-- ---- ---
7 --- --:-- --:-- ---- ---
8 --- --:-- --:-- ---- ---
SPL SAT-SUN
5. Check to see that the cursor is to the left of program number
“1” and turn the SHUTTLE ring clockwise twice.
• The “DW” display reverses in color when the SHUTTLE
ring is turned the first time. When the ring is turned for the
second time, the background turns red and flashes.
6. Turn the JOG dial to display “SPL” in “DW” and turn the
SHUTTLE ring clockwise.
• The setting is confirmed and flashing stops.
When selecting the wrong day of the week in
error, turn the SHUTTLE ring clockwise, use the
JOG dial to display the correct day of the week and
turn the SHUTTLE ring clockwise again.
7. Turn the JOG dial clockwise to move the reversed display
to the “hour” of the start time and turn the SHUTTLE ring
clockwise.