Instruction manual
39
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Operations
ENGLISH
■ REAR TERMINAL SETTINGS
♦ MODE OUT 1 ~ MODE OUT 4
The unit status can be outputted from the MODE OUT ter-
minals on the rear. There are 4 MODE OUT terminals and
each terminal can be set with the output type.
<REAR TERMINAL SETTINGS>
>>
MODE OUT 1 OFF
MODE OUT 2 OFF
MODE OUT 3 OFF
MODE OUT 4 OFF
KEY SOUND ON
BUZZER REMAIN
REMAIN HDD HDD-10
%
CALL OUT SETTINGS
EMERGENCY REC DURATION 10M
Setting ( default : “OFF” )
“REC” : Outputs signals during recording.
“PLAY” : Outputs signals during playback.
“REMAIN” : Outputs signals when the remaining
HDD space reaches the value specified in “REMAIN
HDD”.
“POWER” : Outputs signals when the power of the
unit turns on.
“MOTION1” ~ “MOTION4” : Outputs the camera
numbers detected during motion detection record-
ing using binary notation. (MODE OUT 1 ~ MODE
OUT 4 are linked.) Furthermore, motion detection
inputted the last is maintained for 2 seconds.
“ALARM” : Outputs signals during alarm recording.
“OFF” : No signal is outputted.
！
Capacity warning from MODE OUT is only
outputted during recording.
1. Select the SET UP button
}
<SETTINGS>
}
<INITIAL SET
UP/INFORMATION>
}
Select “REAR TERMINAL SETTINGS”
screen.
2. From the 4 MODE OUT terminals, display the desired setting
for the terminal (MODE OUT 1 ~ MODE OUT 4) to output
signals and then confirm.
MODE OUT terminals
1
O
X
O
X
O
X
O
X
O
4
X
X
X
X
X
X
X
O
O
3
X
X
X
O
O
O
O
X
X
2
X
O
O
X
X
O
O
X
X
9
7
4
5
6
1
2
3
8
O : Signal is outputted.
X : No signal is outputted.
Relation between a camera number and a MODE OUT output
3. To set other terminals, repeat step 2.
4. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
♦ KEY SOUND
It is possible for the unit to make button sounds when us-
ing the operation buttons on the front of the unit or when
operating the JOG dial or SHUTTLE ring.
<REAR TERMINAL SETTINGS>
MODE OUT 1 OFF
MODE OUT 2 OFF
MODE OUT 3 OFF
MODE OUT 4 OFF
>>
KEY SOUND ON
BUZZER REMAIN
REMAIN HDD HDD-10
%
CALL OUT SETTINGS
EMERGENCY REC DURATION 10M
1. Press the SET UP button
}
<SETTINGS>
}
<INITIAL SET
UP/INFORMATION>
}
Select “KEY SOUND” in the <RAR
TERMONAL SETTINGS> screen. Display the desired setting
and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
♦ BUZZER
It is possible for a buzzer to sound when the remaining
HDD space reaches the value set in “REMAIN HDD” of
the <REAR TERMINAL SETTINGS> screen. Other than
the above, it is possible to set the buzzer to sound when
staring alarm recording or emergency recording, or when
a warning is displayed.
<REAR TERMINAL SETTINGS>
MODE OUT 1 OFF
MODE OUT 2 OFF
MODE OUT 3 OFF
MODE OUT 4 OFF
KEY SOUND ON
>>
BUZZER REMAIN
REMAIN HDD HDD-10
%
CALL OUT SETTINGS
EMERGENCY REC DURATION 10M
To sound a buzzer only when reaching a specified value :
1) Select “REMAIN” for “BUZZER” in the <REAR TERMI-
NAL SETTINGS> screen.
2) Set the remaining capacity in “REMAIN HDD” of the
<REAR TERMINAL SETTINGS> screen.
To sound a buzzer when reaching the set remaining ca-
pacity or when a warning is displayed :
1) Select “WARNING” for “BUZZER” in the <REAR TER-
MINAL SETTINGS> screen.
2) Set the remaining HDD capacity (HDD REMAIN WARN-
ING) in “CALL OUT SETTINGS” of the <REAR TERMI-
NAL SETTINGS> screen.