Instruction manual

51
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Operations
ENGLISH
！
Once the playback interval is changed, the green
display of the playback interval will remain un-
changed even when returning the playback interval
to the original value. To check the original playback
interval of the recording, pause playback and then
play the video again.
！
Altering the playback interval settings and then
performing a quick playback of image data with long
recording intervals may cause discrepancies be-
tween actual recording time and the recording time
displayed on the screen.
When changing to the single display mode with
“2” or “3” set in “DISPLAY MODE” in the <TIME
DATE /DISPLAY SETTINGS> screen, the play-
back interval is displayed on the screen in green
for easy confirmation if the value is changed.
■ Monitor display settings and playback
operation
• Single screen : The screen will change frame by frame at
a rate equal to the recording interval multiplied by the
number of cameras used in the recording.
• SPLIT4 : Each mini-screen will change frame by frame at
a rate equal to the recording interval multiplied by the
number of cameras used in the recording. The screen dis-
play shift to still frame mode during playback from a cam-
era which is not indicated.
• SPLIT9 : Each mini-screen will change frame by frame at
the recorded interval. The screen display shift to still frame
mode during playback from a camera which is not indi-
cated.
■ Simultaneous playback during recording
The data being recorded can be played back simultane-
ously.
！
The video being played back may pause tempo-
rarily or the sound may be interrupted.
！
Noise may be noticeable on the video during shut-
tle playback.
Split screen display can be selected individually
for recording/playback.