Instruction manual

14
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
•
Функции меню (продолжение)
<QUICK SETTINGS>
>> LOAD SETTING DATA FROM CFC
SAVE SETTING DATA TO CFC
<INITIAL SET UP/INFORMATION>
>> HDD SETTINGS
AUDIO RECORDING OFF
REAR TERMINAL SETTINGS
RS-232C
INFORMATION/SERVICE
<HDD SETTINGS>
>> HDD REPEAT REC OFF
HDD REPEAT PLAY OFF
IM-CHECK PLAY OFF
SEQUENTIAL PLAY OFF
<REAR TERMINAL SETTINGS>
>> MODE OUT 1 OFF
MODE OUT 2 OFF
MODE OUT 3 OFF
MODE OUT 4 OFF
KEY SOUND ON
BUZZER REMAIN
REMAIN HDD HDD-10
%
CALL OUT SETTINGS
EMERGENCY REC DURATION 10M
<CALL OUT SETTINGS>
>> HDD REMAIN OFF
HDD FULL OFF
<RS-232C>
>> MODE REMOTE A
SETTINGS
<RS-232C SETTINGS>
>> TRANSMISSION MODE 1200
DATA BIT LENGTH 8BIT
PARITY BIT NONE
STOP BIT LENGTH 1BIT
DELIMITER CR
<INFORMATION>
CFC
CAPACITY 64MB
MENU INFORMATION
START ---------- --:--:--
END ---------- --:--:--
<INFORMATION/SERVICE>
>> HDD INFORMATION
CFC INFORMATION
WARNING LOG LIST
SETTING DATA INITIALIZE
HDD DATA CLEAR
CFC DATA CLEAR
ELAPSED TIME 10H
<WARNING LOG LIST>
NO DATE TIME WARNING
>> 0001 01-01-02 00:00:00 ALM ON
<INFORMATION>
HDD
MASTER HDD(80GB)
SLAVE NONE
START ---------- --:--:--
END ---------- --:--:--
<HDD DATA CLEAR>
PUSH WARNING RESET KEY
FOR 1 SECOND TO CLEAR
<CFC DATA CLEAR>
PUSH WARNING RESET KEY
FOR 1 SECOND TO CLEAR
<SETTINGS>
>> TIME DATE/DISPLAY SETTINGS
MPX DISPLAY SETTINGS
MOTION DETECTION SETTINGS
RECORD SETTINGS
TIMER PROGRAM SETTINGS
INITIAL SET UP/INFORMATION
QUICK SETTINGS
MEMO:
<SETTING DATA INITIALIZE>
>> EXECUTE
SHUTTLE>>:EXECUTE,<<:CANCEL
SET UP
<INITIAL SET UP/INFORMATION>
<HDD SETTINGS>
<REAR TERMINAL SETTINGS>
<CALL OUT SETTINGS>
<RS-232C>
<INFORMATION/SERVICE>
<RS-232C SETTINGS>
<SETTING DATA INITIALIZE>
<INFORMATION> (HDD)
<INFORMATION> (CFC)
<WARNING LOG LIST>
<QUICK SETTINGS>
SUB MENU (3)
<HDD DATA CLEAR>
<CFC DATA CLEAR>
ГЛАВНОЕ МЕНЮ ВСПОМОГАТЕЛЬНОЕ МЕНЮ (1) ВСПОМОГАТЕЛЬНОЕ МЕНЮ (2) ВСПОМОГАТЕЛЬНОЕ МЕНЮ (3)