Instruction manual

ManualsBrandsMitsubishi ManualsMusical equipmentDX-TL800E120

ENGLISH

OTHERS

DIGITAL RECORDER

RS232 PROTOCOL

MODEL

DX-TL800E120

THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER.

Summary of content (23 pages)

PAGE 1
ENGLISH OTHERS DIGITAL RECORDER RS232 PROTOCOL MODEL DX-TL800E120 THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER.
PAGE 2
Connecting to a personal computer ■ Connecting with a personal computer This unit can be remote controlled from a PC equipped with a RS-232C connection. It is also possible to input comments from a PC for recording comment information along with the video. ♦ Connection via modem Please use RS-232C Straight cable (9pin) to connect a modem with this unit. The setting of CTS should be set to “HIGH” or “ON”. Please refer to the instruction manual of a modem for details about connection.
PAGE 3
Command codes ENGLISH ■ RS-232C settings Communication related settings of this unit are made in “MODE” and “SETTINGS” of the screen. Perform settings so that they are the same as the connecting modem or PC. When remote controlling this unit from a PC, set “MODE” in the screen to “REMOTE A” (status condition change information is returned from the unit) or “REMOTE B” (status condition change information is not returned from the unit).
PAGE 4
Command codes (continued) ♦ False operation panel command type Operations can be specified from a PC as if operating the actual operation panel of the unit while viewing the output video. Each command is a command type that corresponds to the operation button of the unit. • Input confirmation type Send commands as if operate the buttons, JOG dial and SHUTTLE ring of the operation panel.
PAGE 5
ENGLISH ♦ Details of the numbers #1 : When the setting of DELIMITER on display is set to CR, carriage return code (0DH) will be input. If the setting is CR•LF, carriage return code (0DH) and line feed code (0AH) will be input. #2 : When the setting of DELIMITER on display is set to CR, carriage return code (0DH) will be output. If the setting is CR•LF, carriage return code (0DH) and line feed code (0AH) will be output. : Indicates one number or a character.
PAGE 6
Command codes (continued) • RS-232C [Direct operation specification] operation setting system command form (Continued) Commands name Comment search Status Commands (1) (2) (3) (4) ** ** ** PB ***************** ** ** ** ** ** **************** ** ************** ***************** *** * ,** PB (5) RC EX, #2 (7) (1) (2) (3) (4) (5) (6) #1 (6) (8) #2 Notes : Comment search (80) (2) : Search direction 00 : Forward 01 : Reverse (3) : number of search time (01 ~ 99) (4) : Camera number 00 : CH1 01
PAGE 7
Menu TIME DATE ADJUST Commands
(1) (2) #1 DW, (1) #1 DR, ***** ***** ***** Status (3)DW, RC #2 EX, ** ***** ***** RC EX, ** DR,***** ***** (3) #2 (1) ***** (1) (2) #2 ** ***** ***** ** ***** ***** ** ***** ***** DISPLAY MODE CLOCK LOCATION SETTING CAMERA DISPLAY CAMERA TITLE/ (1) (2) MEMO SETTING DW02, (1) DR02, ***** ***** *****
PAGE 8
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form Menu Commands SPIT 4 SCREEN
(1) (2) #1 SETTING DW, (1) #1 DR, ***** ***** ***** Status (3)DW, RC #2 EX, Notes SPLIT 4(a) ** ***** ***** RC EX, ** DR,***** ***** (1) (2) #2 #2 (3) (2) #2 (1) (1) : 00368 ~ 00371 00368 : Top - left 00369 : Top - right 00370 : Bottom - l
PAGE 9
Menu Commands SELECTION
(1) (2) #1 CAMERA NUMBER DW, (1) #1 DR, ***** ***** ***** Status (3)DW, RC #2 EX, ** ***** ***** RC EX, ** DR,***** ***** #2 (3) (2) #2 DETECTION MASK SETTING SENSITIVITY (1) (2) #2 (1) ***** (1) 00576 : CH1 00578 : CH3 00580 : CH5 00582 : CH7 00585 : CH9 ENGLISH • RS-232C [Direct operation specification] menu setting system command form
PAGE 10
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form Menu RECORD SETTING PPS Commands
(1) (2) #1 DW, (1) #1 DR, ***** ***** ***** Status (3)DW, RC #2 EX, ** ***** ***** RC EX, ** DR,***** ***** #2 (3) (2) #2 RECORD SETTING GRADE (1) (2) #2 (1) ***** (1) 04032 : CH1 04034 : CH3 04036 : CH5 04038 : CH7 04040 : CH9 Notes :
PAGE 11
Menu Commands SELECTED PATTERN
(1) (2) #1 DW, (1) #1 DR, ***** ***** ***** Status (3)DW, RC #2 EX, Notes : 04112 (2) : 00000 : P1 00001 : P2 00002 : P3 (3) : Error type ***** ***** (1) ** ***** ***** RC EX, ** DR,***** ***** RC EX, ** DW01,** ***** ***** ***** ***** ***** ***** ***** RC EX, ** DR01,** ***** ***** ***** ***** ***** ****
PAGE 12
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (Continued) Menu Commands TIMER PROGRAM
(1) (2) #1 SETTINGS DW, REC MODE (1) #1 DR, ***** ***** ***** Status (3)DW, RC #2 EX, ** ***** ***** RC EX, ** DR,***** ***** (1) (2) #2 #2 (3) (2) #2 TIMER PROGRAM SETTINGS PPS Notes (1) ***** (1) 04480 : A 04484 : C : 0
PAGE 13
Menu Commands TIMER PROGRAM
(1) (2) #1 SETTINGS DW, A-GRADE (1) #1 DR, ***** ***** ***** Status (3)DW, RC #2 EX, Notes (1) ** ***** ***** RC EX, ** DR,***** ***** (1) (2) #2 #2 (3) (2) #2 ENGLISH • RS-232C [Direct operation specification] menu setting system command form (Continued) (1) : 04752 ~ 04787 ***** 04752 : A - CH1 04753 : A - CH2 04754 : A - CH3 04755
PAGE 14
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form Menu HDD REPEAT REC Commands
(1) (2) #1 DW, (1) #1 DR, ***** ***** ***** Status (3)DW, RC #2 EX, ** ***** ***** RC EX, ** DR,***** ***** (1) (2) #2 #2 (3) (2) #2 HDD REPEAT PLAY Notes (1) ***** ***** (1) : 04832 (2) : 00000 : OFF 00002 : STANDBY (3) : Error
PAGE 15
Menu RS-232C MODE Commands
(1) (2) #1 DW, (1) #1 DR, ***** ***** ***** Status (3)DW, RC #2 EX, RS-233C SETTINGS DATA BIT LENGTH RS-232C SETTINGS PARITY BIT RS-232C SETTINGS STOP BIT LENGTH RS-232C SETTINGS DELIMITER (1) (2) #2 (3) (2) #2 RS-232C SETTINGS TRANSMISSION RATE Notes ** ***** ***** RC EX, ** DR,***** ***** #2 ENGLISH • RS-232C [Direct operation specification] menu setting sys
PAGE 16
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form
Refer to the playback of [Direct operation specification] operation setting system command form for search execution.
PAGE 17
Menu COPY DIRECTION COPY MODE Commands (1) #1 DR, *****
(1) (2) #1 DW, (1) #1 DR, ***** ***** ***** Status (3)DR, (1) RC #2 EX, ** ***** (2) #2 ***** Notes (1) ***** :: 05120 ***** 00000 : HDD CFC : Error type ** ***** :: 05121 ***** 00000 : OVERWRITE ** : Error type (2) 00001 : CFC HDD (3) (3)DW, RC #2 EX, (1) ** ***** *****
PAGE 18
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form Menu Commands RECORDING (1) #1 PATTERN DR, ***** CHECK THE MD? CONDITION CHECK THE ME? CONDITION ACQUIRE THE UTO? ELAPSED TIME Status (3)DR, RC #2 EX, Notes : 05268 (2) : (1) (2) #2 00000 : NORMAL (3) : Error type (1) : System condition RC #2 (2) : Key lock condition (26)MD, (1) (2) (3) (4) EX, (3) : Remote / local cond
PAGE 19
Button POWER REC/STOP KKR0 KKR1 STOP KKB0 PLAY KKB1 REV.
PAGE 20
Command codes (continued) • RS-232C Status condition change information system Mode System mode Status EX,AA, Notes (1) : System mode **** 0100 : Power off (1) #2 **** 0103 : Power on 0106 : Setting menu 0107 : Copy menu 0108 : Search menu 0109 : Device unusual situation 010A : Device initialize 010B : Device reconstruction 010F : System unusual situation (1) : Timer mode 0500 : Timer off 0501 : Timer on 0502 : Timer error (1) : Alarm disable mode 0600 : Alarm disable off 0601 : Alarm disable on (1) :
PAGE 21
. (Space) 00032 ! " # $ % & ' ( 00033 00034 00035 00036 00037 00038 00039 00040 + , - .
PAGE 22
Comment search Characters (character strings) inputted from a PC connected to this unit by RS-232C connection can be recorded as comments along with the video/audio. Recorded comments can be displayed during playback. Furthermore, recorded comments can be specified for search so that the video with the comment can be played back from the beginning.
PAGE 23
ENGLISH ■ Sample operation 1) Record character string “ABCDEF” as a comment along with the video. (When “DELIMITER” in the screen is set to “CR”.) The operation is performed on a PC. 1. Set the character (or characters string) to be recorded; 2. Record the selected character(s). By using the COMS command, characters which have been set once can be recorded any number of times. To record a different character set, use the COMD command. Up to 32 characters can be inputted.