Specifications

FX Series CPU Direct Driver
GP-Pro EX Device/PLC Connection Manual
39
6 Supported Device
Range of supported device address is shown in the table below. Please note that the actually supported range of
the devices varies depending on the External Device to be used. Please check the actual range in the manual of
your connecting equipment.
6.1 When using FX1
This address can be specified as system data area.
Device Bit Address Word Address 32bits Notes
Input Relay X000 - X167 X000 - X160
*1 *2
*1 Includes an area in which you cannot write.
*2 Specify word address only for the divisible value by 20oct. (Example: X0, X20, X40..., X160)
Output Relay Y000 - Y167 Y000 - Y160
*2
Internal Relay M0000 - M1023 M0000 - M1008
Special Auxiliary
Relay
M8000 - M8255 M8000 - M8240
*3
*3 Special area. This area may be used by the system, and includes an area in which you cannot write. Please refer
to the manual attached to the External Device for more detail.
State S0000 - S0999 S0000 - S0992
Timer (Contact) TS000 - TS245 ------
Counter (Contact)
CS000 - CS135
CS200 - CS255
------
Timer (Current
Value)
------ TN000 - TN245
Counter (Current
Value)
------ CN000 - CN135
Counter (Current
Value)
------ CN235 - CN255
*4
*4 32-bit device.
Data Register ------ D000 - D127
Special Data
Register
------ D8000 - D8069
*3
• Please refer to the GP-Pro EX Reference Manual for system data area.
Cf. GP-Pro EX Reference Manual "Appendix 1.4 LS Area (Direct Access Method)"
• Please refer to the precautions on manual notation for icons in the table.
)"Manual Symbols and Terminology"