Specifications

FX Series CPU Direct Driver
GP-Pro EX Device/PLC Connection Manual
40
6.2 When using FX2, FX2C, FX0N, FX0S
This address can be specified as system data area.
Device Bit Address Word Address 32bits Notes
Input Relay X000 - X337 X000 - X320
*1 *2
*1 Includes an area in which you cannot write.
*2 Specify word address only for the divisible value by 20oct. (Example: X0, X20, X40..., X320)
Output Relay Y000 - Y337 Y000 - Y320
*2
Internal Relay M0000 - M1535 M0000 - M1520
Special Auxiliary
Relay
M8000 - M8255 M8000 - M8240
*3
*3 Special area. This area may be used by the system, and includes an area in which you cannot write. Please refer
to the manual attached to the External Device for more detail.
State S0000 - S0999 S0000 - S0992
Timer (Contact) TS000 - TS245 ------
Counter (Contact) CS000 - CS255 ------
Timer (Current
Value)
------ TN000 - TN255
Counter (Current
Value)
------ CN000 - CN199
Counter (Current
Value)
------ CN200 - CN255
*4
*4 32-bit device.
Data Register ------ D0000 - D2999
*5
*5 D1000-D2499 in FX0N is the file register.
To use this area in FX0N, you need set it as file register. Please refer to the manual attached to the External
Device for more detail.
Special Data
Register
------ D8000 - D8255
*3
• Please refer to the GP-Pro EX Reference Manual for system data area.
Cf. GP-Pro EX Reference Manual "Appendix 1.4 LS Area (Direct Access Method)"
• Please refer to the precautions on manual notation for icons in the table.
)"Manual Symbols and Terminology"