Instruction manual

10
Note
A point to notice
Info.
Supplementary information
Basic Functions
4. Turn SHUTTLE to the right to make the
1-minute digit flash and turn JOG to
adjust.
To finish the clock adjustment now,
press MENU button for more than 3
seconds.
5. Turn SHUTTLE to the right to make the
month digits flash and turn JOG to
adjust.
• The Month indicator ( ) flashes.
6. Turn SHUTTLE to the right to make the
day digits flash and turn JOG to adjust.
• The Day indicator (
) flashes.
7. Turn SHUTTLE to the right to make the
year digits flash and turn JOG to adjust.
8. Turn SHUTTLE to the right.
• The VCR’s clock is set now.
When adjusting the clock to the exact second
Set the clock as described above, but set 1-minute digit to one
or two minutes ahead of the reference time being used. After
the step 7 above, when reference time reaches 00 second of
the minute you have chosen, turn SHUTTLE to the right. The
VCR’s clock now corresponds to the reference time to the
nearest second.
Info.
Use of JOG dial and SHUTTLE ring for menu setting
JOG dial
• Use JOG by placing a finger in the indent and turning.
• Turning JOG to the right moves the selection forward.
Turning it to the left moves the selection back.
• If the selection is not flashing, turn JOG to the right to
move the cursor (
) down one position then to the left to
move back to your selection.
SHUTTLE ring
• If you turn SHUTTLE to the right/left end and release it,
SHUTTLE comes back to the centre position automatically.
• Navigate to the next menu layer by turning SHUTTLE to
the right. Return to the previous menu layer by turning
SHUTTLE to the left.
Adjusting the Clock (Cont.)
JOG dial
SHUTTLE ring