Instruction manual

20 Installation
Note
A point to notice
Info.
Supplementary information
Connection for External Time Clock Adjustment
Connect VCRs as shown below. ( page 21 for the menu setting)
2nd VCR1st VCR
Switch
RST
IN
REC GND ALMALM MODE CLK
OUT
CALL
RST
IN
REC GND ALMALM MODE CLK
OUT
CALL
*1 : When connecting the MODE OUT terminal of the first VCR with the RST IN terminal of the second VCR,
the on-screen clock of the second VCR can be adjusted to that of the first VCR.
*1
Connections for Various Functions (Cont.)
Series Recording Connection
Connect VCRs to be used as shown below.( page 13 for the menu setting)
Remote Recording Connection
Connect the VCR with a remote switch as shown below. ( page 13 for the menu setting)
*1 : This connection is necessary
in case of
Series Recording 2 .
*1
1st VCR
RST
IN
REC GND ALMALM MODE CLK
OUT
CALL
2nd VCR
RST
IN
REC GND ALMALM MODE CLK
OUT
CALL
Remote switch
RST
IN
REC GND ALMALM MODE CLK
OUT
CALL
Setting the Clock
• ’00 indicates year 2000.
• The clock is shown in 24-hour format.
• Alarm recording counter is shown during alarm recording
only.
Accurately set the day and present time before timer programming.
Day
Month
Year
Hour
Alarm
Recording
Counter
Second
Minute
09-07-’01 20:25:00 A0001