Instruction manual

23Installation
Reference page
ENGLISH
DISPLAY
Setting the display mode (DISPLAY MODE)
1 : Shows date and present time.
2 : Shows date, day of the week,
present time and recording mode.
3 : Displays nothing. In case of alarm
recording, displays same items as
DISPLAY MODE 2.
4 : No date or time display.
<DISPLAY>
DISPLAY MODE 1
TIME DATE SIZE SMALL
BLUE BACK OFF
e.g.<MODE 1>
09-07-’01 00:00:00
Day
Month
Year
Hour
Alarm
Recording
Counter*
Second
Minute
09-07-’01 20:25:00 A0001
DISPLAY MODE 1
Day
Month
Day of
the Week
Year
Hour
Alarm
Recording
Counter*
Second
Minute
09-07-’01 MON A0001
20:25:00 3
Recording
Mode
DISPLAY MODE 2 and 3
RECORDING SET UP
Setting the alarm recording mode
(ALARM REC MODE)
Sets the alarm recording time mode.
When JOG is turned, the display will
be switched in the order of 3H L12H
L24H 3H ...
Setting the alarm recording
duration (ALARM REC DURATION)
Sets the duration of the alarm recording period. When JOG is
turned, the display will be switched in the order of 1M (minute)
2M 5M 10M MAN1 MAN2 15S (second)
30S 45S 1M ...
Setting the emergency recording (EMERGENCY REC)
ON : Starts alarm recording when the ALM IN terminal is
grounded while the VCR is recording, in stop mode,
turned off or in stand-by mode for timer recording.
OFF : Starts alarm recording when the ALM IN terminal is
grounded during recording.
Setting the clog detection (CLOG DETECT)
ON : The VCR automatically removes any particles that
may accumulate on the heads during time-lapse
recording. If it cannot be entirely removed, a warning
“CLOg” flashes on the fluorescent display (
page
29).
OFF : The VCR does not detect clogged head.
<RECORDING SET UP>
ALARM REC MODE 3H
ALARM REC DURATION 1M
EMERGENCY REC OFF
CLOG DETECT ON
TIMER PROGRAM
page 11, Timer Recording.
MAIN MENU
DISPLAY
Sets the display format of the date
and present time on screen.
TIMER PROGRAM
Sets the timer recording.
RECORDING SET UP
Sets the alarm recording mode,
alarm recording duration and
emergency recording, etc.
REAR TERMINAL
Sets the frequency division ratio of CLOCK OUT, output
signal of CALL OUT terminal and MODE OUT terminal, etc.
MAINTENANCE
Displays the power loss list and alarm list, etc. Also,
initialises all menu settings, clears the power loss list and
alarm list.
CLOCK/FIRST TIME SET UP
Sets the present time and the operation at the tape end, etc.
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP
Use JOG to select,
and ENTER.
Press MENU to exit.
ENGLISH
DEUTSCH
FRANÇAIS
CASTELLANO
NEDERLANDS
ITALIANO
Use JOG to select,
and ENTER .
LANGUAGE SELECTION
The menu which appears on screen offers 7 languages.
This menu appears by pressing MENU button, when the VCR is
turned on for the first time after the purchase or when RESET
button is pressed during use.
1. Press MENU button.
• The menu as shown to the right
appears.
2. Turn JOG to select the desired
language.
3. Turn SHUTTLE to the right.
• <MAIN MENU> in the selected
language appears on screen.
4. Press MENU button to exit.
Note
• After first time setup and selection of the language to be
used, the only way to go back and access the main menu in
the seven languages is to PRESS the RESET button found
on the rear panel. The RESET button can be accessed with
a small pointed object. The RESET button is pressed,
repeat steps 1 to 4 above.
* shown when DISPLAY MODE 1, 2 or 3 is selected.
Setting the size of letter for date and present time display
(TIME DATE SIZE)
SMALL : The size of the letters become small.
LARGE : The size of the letters become large.
Setting the background colour (BLUE BACK)
ON : The blue coloured screen overlays on the recorded
picture when the menu is displayed on the monitor.
OFF : The recorded picture is overlaid with the menu display.
Note
• When the setting is OFF and the video signal is not input,
the blue coloured screen overlays on the recorded picture
when the menu is displayed on the monitor.
• When the setting is ON and the video signal is not input, the
background colour will be in blue. In this case, the warning
“NO SIGNAL” flashes on screen and “noSI
g
” flashes on the
fluorescent display.