Operating instructions

Chapter3: OperatingYourVCR SelectingtheOn-screenLanguage(cont.)

Espafiol

Franqais

Use ADJUST to select.

and _N_ER •........L :........

O Press the JOG/ADJUST buttons on the reraote control to

move the cursor next to the desired language.

O Press the ENTER button on the remote control. The menu

Will change to the _VCR Main Menu."

Press the MENU button to exit the menus.

Dlmportant: The "Select Language" menu is unique. While all other menus can

be accessed at almost any time, the "Select Language" menu will

not automatically appear again ai%er it is first set. To see the

"Select Language" menu, press the TIMER RESET button on the

rear panel to clear the language setting. Then, follow the instruc-

tions above.

UsingtheAudioandVideoFunctions

You can use the remote control to select many of the VCR's audio

and video functions and adjust their settings. _e VCR will

display the settings on the television's screen.

This section will teach you about:

• Selecting and adjusting the audio and video functions, and

• Descriptions of audio and video functions.

The audio and video functions you can adjust are:

--monitor,

-- normal record,

-- level meter,

-- front display,

--record speed, and

tape.

Selectingandadjustingthe audioandvideofunctions

Below are instructions on how to select and adjust these func-

tions. If you are not familiar with the purpose of these functions,

definitions begin on the next page.

Beforeyoubegin,youneedtoknow:

• how to view the picture coming from your VCR (page 22).

Press the AUDIO/VIDEO button on the remote control to see

the function menu.

VCR

Monitor STEREO

Use ADJUST to select