Operation Manual

Seat and restraint systems
2-29
2
Using the LATCH system
N00419100229
1. In order to securely fasten the tether strap, remove the
head restraint from the location where you wish to install
the child restraint system.
2. Open the gap a little between the seat cushion (A) and the
seatback (B) with your hand to locate the lower anchor-
ages (C).
3. Push the anchor connectors (D) on the child restraint sys-
tem into the lower anchors (C) in accordance with the
instructions provided by the child restraint system manu-
facturer. Remember, the lower anchors provided with your
vehicle are designed to secure suitable child restraint sys-
tems compatible with the LATCH system in the outboard
positions of the rear seat only.
A- Vehicle seat cushion C- Lower anchor
B- Vehicle seatback D- Connector
BK0140800US.book 29 ページ ２０１１年９月２９日 木曜日 午後３時２８分