Operation Manual

2-42
Seat and restraint systems
2
● To ensure that the passenger’s seat occupant classifi-
cation sensor system can correctly sense the weight
being applied to the seat, observe the following
instructions. Failure to follow these instructions can
adversely affect the performance of the passenger’s
airbag system.
• Adjust the seat to the correct position, and sit well
back against the seatback.
Refer to “Front seats” on page 2-3.
• Do not recline the seatback more than necessary.
• Never have more than one person (adult or child)
sitting on the seat.
• Do not place anything between the seat and the
floor console.
• When attaching a child restraint system, secure it
firmly.
• Do not place luggage or other objects on the seat.
• Do not use a seat cover or a cushion.
• Do not modify or replace the seat and seat belt.
• Do not place luggage or other objects under the
seat.
• Do not place and use an electronic device such as a
computer on the seat.
• Do not place heavy objects on the seat or stick
pins, needles, or other objects into it.
• Do not remove the seat cushion skin.
• If any liquid is spilled on the seat, wipe it and dry
the seat immediately.
WARNING
!
● If the vehicle is involved in a severe impact, have the
SRS sensors inspected by a certified i-MiEV dealer
as soon as possible.
WARNING
!
BK0140800US.book 42 ページ ２０１１年９月２９日 木曜日 午後３時２８分