Operation Manual

Features and controls
3-21
3
Alarm deactivation
The alarm can be deactivated in the following ways.
● By using the keyless entry system to lock or unlock the
doors and liftgate.
● Turn the electric motor switch to the “ON” position.
Disarmed stage
The system will be disarmed if the following operation is per-
formed.
● The electric motor switch is turned to the “ON” position.
● All doors and the liftgate are unlocked by using the
keyless entry system.
N
OTE
● If the UNLOCK button on the remote control transmitter
is operated when all doors and the liftgate are closed and
no door is opened within approximately 30 seconds, re-
arming will automatically occur.
● The amount of time after unlocking until the vehicle
relocks automatically can be adjusted. See a certified i-
MiEV dealer for details.
● Once the system has been disarmed, it cannot be rearmed
except by repeating the arming procedure.
Testing the theft-alarm system
Use the following procedure to test the system:
1. Lower the driver’s window.
2. Arm the system as explained in “Armed stage”.
3. Make sure that the theft-alarm indicator comes on and
flashes for approximately 20 seconds.
4. Wait a few seconds and then unlock the driver’s side door
by using the inside door lock knob. Open the door.
5. Make sure that the horn sounds intermittently and the
headlights blink when a door is opened.
6. Disarm the system by unlocking all doors and the liftgate
by using the keyless entry system.
Disarm...by using the keyless entry system
BK0140800US.book 21 ページ ２０１１年９月２９日 木曜日 午後３時２８分