Operation Manual

3-56

Features and controls

Reference lines on the screen

Reference lines and upper surface of the rear bumper (A) are

displayed on the screen.

● Red line (B) indicates approximately 20 inches (50 cm)

behind the rear bumper.

● Two Green lines (C) indicate approximately 8 inches

(20 cm) outside of the vehicle body.

● Short transverse lines (1 to 3) indicate distance from the

rear bumper.

1: Approximately at the rear edge of the rear bumper

2: Approximately 39 inches (100 cm)

3: Approximately 79 inches (200 cm)

CAUTION

● The rear-view camera uses a wide-angle lens. As a

result, images and distances shown on the screen are

not exact.

● Actual distance may be different from distance indi-

cated by the lines on the screen, depending on the

loading condition of the vehicle and road surface

condition.

The reference lines for distance and vehicle width

are based on a level, flat road surface. In the follow-

ing cases, objects shown on the screen will appear to

be farther off than they actually are.

• When the rear of the vehicle is weighed down with

the weight of passengers and luggage in the vehi-

cle. (Case 1)

• When there is an upward slope at the back.

(Case2)

BK0140800US.book 56 ページ２０１１年９月２９日　木曜日　午後３時２８分