Operation Manual

Features and controls
3-115
3
To import a devices phonebook
Follow the steps below to transfer to the mobile phonebook the
phonebook stored in the cellular phone.
N
OTE
● Transfer should be completed while the vehicle is parked.
Before transferring, make sure that the vehicle is parked
in a safe location.
● The already stored phonebook in the mobile phonebook is
overwritten by the stored phonebook in the cellular phone.
● All or part of data may not be transferred, even when the
cellular phone supports Bluetooth
®
, depending on the
compatibility of the device.
● Only a home, a work, and a mobile number can be
imported.
● The maximum supported telephone number length is 19
digits. Any telephone number of 20 digits or more will be
truncated to the first 19 digits.
● If telephone numbers contain characters other than 0 to 9,
*, # or +, these characters are deleted before the transfer.
● For the connection settings on the cellular phone side,
refer to the instructions for the cellular phone.
1. Press the SPEECH button.
2. Say “Phonebook.”
3. The voice guide will say “Select one of the following:
new entry, edit number, edit name, list names, delete,
erase all, or import contact.” Say “Import contact.”
4. The voice guide will say “Would you like to import a sin-
gle entry or all contacts?” Say “All contacts.”
5. The voice guide will say “Importing the contact list from
the mobile phonebook. This may take several minutes to
complete. Would you like to continue?” Answer “Yes,”
transferring to the mobile phonebook the phonebook
stored in the cellular phone will start.
Answer “No,” the system will return to the main menu.
N
OTE
● The transfer may take some time to complete depending
on the number of contacts.
● If the Bluetooth
®
2.0 interface could not be connected to
the Bluetooth
®
compatible cellular phone, the voice guide
will say “Unable to transfer contact list from phone” and
then the system will return to the main menu.
● If you press the HANG-UP button or press and hold the
SPEECH button during the data transfer, the transfer will
be cancelled and the system will return to the main menu.
● If an error occurs during the data transfer, all transfer will
be cancelled and the voice guide will say “Unable to com-
plete the phonebook import” and then the system will
return to the main menu.
● If there are no contacts in the phonebook, the voice guide
will say “There are no contacts on the connected phone.”
6. When the transfer is complete, the voice guide will say
“Import complete” and then the system will return to the
main menu.
BK0140800US.book 115 ページ ２０１１年９月２９日 木曜日 午後３時２８分