Operation Manual

Comfort controls
5-9
5
“AUTO” position
The vents change to the following positions according to the
position of the temperature control dial.
Refer to “Temperature control dial” on page 5-8.
Air selection switch
N00736800400
Normally, use the outside air position to keep the windshield
and side windows clear and to quickly remove fog or frost
from the windshield.
To change the air selection, simply press the air selection
switch.
● Outside air {Indicator light (A) OFF}
Outside air is introduced into the passenger compartment.
● Recirculated air {Indicator light (A) ON}
Air is recirculated inside the passenger compartment.
Temperature control dial position Ve n t s
Between “C” and middle(●)
: Upper part of front
passenger compartment
Middle(●)
Set the dial to middle
(●) from the “C” side
: Upper part of front
passenger compartment
Set the dial to middle
(●) from the “H” side
: Leg area
Between
middle (●)
and “H”
Near middle (●)
: Leg area
Near “H”
: Leg area,
windshield, and door
windows
CAUTION
!
● When using the mode selection dial between the
“ ” and “ ” positions, prevent fogging by press-
ing the air selection switch to select outside air.
(Refer to “Air selection switch” on page 5-9.)
BK0140800US.book 9 ページ ２０１１年９月２９日 木曜日 午後３時２８分