Operation Manual
5-16
Comfort controls
5
For quick defrosting
1. Set the mode selection dial to the “ ” position.
2. Turn the temperature control dial clockwise or counter-
clockwise to the desired temperature between middle (●)
and “H” position.
3. Press the MAX switch (A).
N
OTE
● When the mode selection dial is set to the “ ” position,
the air conditioning compressor runs automatically. Out-
side air introduction will also be selected automatically.
● When defrosting, do not set the temperature control dial to
the maximum cool position. This would blow cool air on
the window glass and fog it up.
● Since defogging or defrosting with the MAX switch con-
sumes a large amount of power, stop the switch after
defogging or defrosting.
Use the MAX setting for a long time decreases the cruis-
ing range.
BK0140800US.book 16 ページ 2011年9月29日 木曜日 午後3時28分