Operation Manual

5-30
Comfort controls
5
ID3 tag information
The audio system can display ID3 tag information for files that
have been recorded with ID3 tag information.
1. Press the DISP button for 2 seconds or longer to switch to
the ID3 tag information. “TAG” will appear on the dis-
play.
2. Press the DISP button repeatedly to make selections in the
following sequence: album name → track name → artist
name → normal display mode.
N
OTE
● To return from ID3 tag information to the folder name,
press the DISP button again for 2 seconds or longer.
● When there is no title information to be displayed, the dis-
play shows “NO TITLE”.
● The display can show up to 11 characters. If a folder
name, track name, or item of ID3 tag information has
more than 11 characters, press the PAGE button to view
the next 11 characters.
● Folder names, track names and ID3 tag information can
each be displayed up to a length of 32 characters.
● Characters that the audio system cannot display are shown
as “ ”.
To play iPod/USB memory device tracks via
voice operation (vehicles with Bluetooth
®
2.0 interface)
N00772000015
Desired tracks can be selected and played from your iPod by
“Artist”, “Album”, “Playlist” and “Genre” using voice com-
mands.
For information concerning the voice recognition function or
speaker registration function, refer to “Bluetooth
®
2.0 inter-
face” on page 3-91.
The following explains how to prepare for voice operation and
play the tracks.
Preparation for voice operation
N00772100016
To use the voice operation, press the SPEECH button (1) first.
BK0140800US.book 30 ページ ２０１１年９月２９日 木曜日 午後３時２８分