Operation Manual

For emergencies

6-9

3. Remove the screws (A), and remove the cover (B).

4. Remove the tire repair kit.

To store

N00837900018

1. Return the tire repair kit to its original place.

Attach the cover and fasten the screws.

2. Insert two wire tabs at the rear edge of the seat cushion

under the seat back.

3. Pass both rear seat belt buckles through slits at the rear

edge of the seat cushion. Make sure that the seat belt

buckles are not twisted.

4. While pushing the seat cushion as far back as possible,

press down hooks (A) under the seat cushion into the right

and left stopper installation holes (B) until a click is heard.

5. After installing the seat cushion, shake it lightly to con-

firm that it is properly fixed in position.

BK0140800US.book 9 ページ２０１１年９月２９日　木曜日　午後３時２８分