Operation Manual

For emergencies
6-11
6
N
OTE
● Do not pull out an object, such as a nail or screw, that pen-
etrates the punctured tire.
● Move the vehicle so that the tire valve is positioned away
from the point where the tire touches the ground. If the
valve is near the point where the tire touches the ground,
the sealant may not enter the tire easily.
1. Park the vehicle on a safe, flat and level place.
2. Set the parking brake firmly.
3. Move the selector lever to the “P” (PARK) position and
turn the electric motor switch to the “LOCK” position.
4. Turn on the hazard warning flashers and set up a warning
sign, such as a warning triangle or flashing signal lamp, at
an adequate distance from the vehicle, and have all your
passengers leave the vehicle.
5. Take out the tire sealant bottle and the compressor.
6. Shake the tire sealant bottle well.
N
OTE
● In cold conditions (when the ambient temperature is 32 °F
{0 °C} or lower), thickening of the tire sealant can make
the tire sealant hard to squeeze out of the bottle. Warm the
bottle between your hands inside the vehicle.
CAUTION
!
● If the vehicle body is contaminated by the tire seal-
ant, wipe the tire sealant off immediately with a wet
cloth.
● Immediately wash clothes contaminated with tire
sealant.
BK0140800US.book 11 ページ ２０１１年９月２９日 木曜日 午後３時２８分